• 276 引用
  • 8 h指数
1994 …2020

年単位の研究成果

Pureに変更を加えた場合、すぐここに表示されます。

研究成果

2020

Effects of hydrogen content that alters damage evolution mechanisms in SUH 660 precipitation-strengthened Fe–Cr–Ni steel

Verma, V. K., Koyama, M., Hamada, S. & Akiyama, E., 7 22 2020, : : Materials Science and Engineering A. 791, 139750.

研究成果: Contribution to journalArticle

1 引用 (Scopus)

Fatigue crack propagation modes: plastic deformation mode and damage accumulation mode

Hamada, S., Zhang, K., Koyama, M., Ueda, M. & Noguchi, H., 3 1 2020, : : International Journal of Fracture. 222, 1-2, p. 111-122 12 p.

研究成果: Contribution to journalArticle

公開
1 引用 (Scopus)

Planar slip-driven fatigue crack initiation and propagation in an equiatomic CrMnFeCoNi high-entropy alloy

Suzuki, K., Koyama, M., Hamada, S., Tsuzaki, K. & Noguchi, H., 4 2020, : : International Journal of Fatigue. 133, 105418.

研究成果: Contribution to journalArticle

3 引用 (Scopus)

Plastic deformation sequence and strain gradient characteristics of hydrogen-induced delayed crack propagation in single-crystalline Fe–Si alloy

Huynh, T. T., Koyama, M., Takahashi, Y., Hamada, S., Tsuzaki, K. & Noguchi, H., 3 15 2020, : : Scripta Materialia. 178, p. 99-103 5 p.

研究成果: Contribution to journalArticle

2019

Mode I fatigue crack growth induced by strain-aging in precipitation-hardened aluminum alloys

Anis, S. F., Koyama, M., Hamada, S. & Noguchi, H., 12 2019, : : Theoretical and Applied Fracture Mechanics. 104, 102340.

研究成果: Contribution to journalArticle

3 引用 (Scopus)

Weakest region analysis of non-combustible Mg products fabricated by selective laser melting

Proaño, B., Miyahara, H., Matsumoto, T., Hamada, S., Sakai, H., Ogawa, K., Suyalatu & Noguchi, H., 10 2019, : : Theoretical and Applied Fracture Mechanics. 103, 102291.

研究成果: Contribution to journalArticle

1 引用 (Scopus)
2018

Analysis of fatigue crack configuration influence on fatigue life

Aibara, M., Koyama, M., Hamada, S. & Noguchi, H., 1 1 2018, : : Procedia Structural Integrity. 13, p. 1148-1153 6 p.

研究成果: Contribution to journalConference article

公開

Dependence of fatigue limit on step height for stepped 0.45% carbon steel with singular stress field

Hamada, S., Moriyama, T. & Noguchi, H., 2 1 2018, : : Engineering Fracture Mechanics. 188, p. 20-35 16 p.

研究成果: Contribution to journalArticle

1 引用 (Scopus)
3 引用 (Scopus)

Effect of shear-affected zone on fatigue crack propagation mode

Hamada, S., Zhang, K., Zhang, J., Koyama, M., Yokoi, T. & Noguchi, H., 11 2018, : : International Journal of Fatigue. 116, p. 36-47 12 p.

研究成果: Contribution to journalArticle

2 引用 (Scopus)

Influence of hydrogen on tensile and fatigue life properties of 304/308 austenitic stainless steel butt welded joints

Okazaki, S., Matsunaga, H., Nakamura, M., Matsuoka, S. & Hamada, S., 2018, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; 巻数 6B-2018).

研究成果: Chapter in Book/Report/Conference proceedingConference contribution

Influence of shear-affected-zone due to punching on tensile characteristics of steel plate

Zhang, K., Hamada, S., Koyama, M., Yokoi, T. & Noguchi, H., 1 1 2018, : : Procedia Structural Integrity. 13, p. 1047-1052 6 p.

研究成果: Contribution to journalConference article

公開

Proposal and verification of novel fatigue crack propagation simulation method by finite element method.

Sano, T., Sasaki, D., Koyama, M., Hamada, S. & Noguchi, H., 1 1 2018, : : Procedia Structural Integrity. 13, p. 1154-1158 5 p.

研究成果: Contribution to journalConference article

公開

Proposal of fractographic analysis method coupled with EBSD and ECCI

Kaida, T., Koyama, M., Hamada, S., Noguchi, H., Sakurada, E., Yokoi, T. & Ushioda, K., 1 1 2018, : : Procedia Structural Integrity. 13, p. 1076-1081 6 p.

研究成果: Contribution to journalConference article

公開

Re-examination of fatigue crack propagation mechanism under cyclic Mode II loading

Hamada, S., Suemasu, T., Koyama, M., Ueda, M. & Noguchi, H., 1 1 2018, : : Procedia Structural Integrity. 13, p. 1026-1031 6 p.

研究成果: Contribution to journalConference article

公開
1 引用 (Scopus)

Roughness-induced stress shielding effect in fatigue crack propagation under Mode II loading

Hamada, S., Suemasu, T., Fukudome, S., Koyama, M., Ueda, M. & Noguchi, H., 11 2018, : : International Journal of Fatigue. 116, p. 245-256 12 p.

研究成果: Contribution to journalArticle

2 引用 (Scopus)

The influence of fracture surface contact in fatigue crack propagation of material having texture under Mode II loading

Suemasu, T., Koyama, M., Hamada, S., Ueda, M. & Noguchi, H., 1 1 2018, : : Procedia Structural Integrity. 13, p. 1088-1092 5 p.

研究成果: Contribution to journalConference article

公開
2017

A case study of a cooling pipe for a pre-cooler used in a 70-MPa hydrogen station

Okazaki, S., Hamada, S., Itoga, H., Matsunaga, H., Nakamura, M. & Matsuoka, S., 1 1 2017, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; 巻数 6B-2017).

研究成果: Chapter in Book/Report/Conference proceedingConference contribution

8 引用 (Scopus)

Material property controlling non-propagating fatigue crack length of mechanically and physically short-crack based on Dugdale-model analysis

Fukumura, N., Li, B., Koyama, M., Suzuki, T., Hamada, S., Tsuzaki, K. & Noguchi, H., 8 1 2017, : : Theoretical and Applied Fracture Mechanics. 90, p. 193-202 10 p.

研究成果: Contribution to journalArticle

4 引用 (Scopus)

Re-Examination of Correlation between Hardness and Tensile Properties by Numerical Analysis

Hamada, S., Nakanishi, M., Moriyama, T. & Noguchi, H., 6 1 2017, : : Experimental Mechanics. 57, 5, p. 773-781 9 p.

研究成果: Contribution to journalArticle

2 引用 (Scopus)
7 引用 (Scopus)
2016

Notch sensitivity of the fatigue limit in high-strength steel

Hamano, Y., Koyama, M., Hamada, S. & Noguchi, H., 1 1 2016, : : isij international. 56, 8, p. 1480-1486 7 p.

研究成果: Contribution to journalArticle

4 引用 (Scopus)
2015

Effect of internal hydrogen on very high cycle fatigue of precipitation-strengthened steel SUH660

Wu, H., Hamada, S., Oda, Y. & Noguchi, H., 1 1 2015, : : International Journal of Fatigue. 70, p. 406-416 11 p.

研究成果: Contribution to journalArticle

2 引用 (Scopus)

Mechanical examination of crack length dependency and material dependency on threshold stress intensity factor range with Dugdale model

Fukumura, N., Suzuki, T., Hamada, S., Tsuzaki, K. & Noguchi, H., 2 1 2015, : : Engineering Fracture Mechanics. 135, p. 168-186 19 p.

研究成果: Contribution to journalArticle

17 引用 (Scopus)

Notch sensitivity in fatigue limit of high strength steel

Hamano, Y., Koyama, M., Hamada, S. & Noguchi, H., 1 1 2015, : : Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan. 101, 10, p. 552-558 7 p.

研究成果: Contribution to journalArticle

Qualification of chromium-molybdenum steel based on the safety factor multiplier method in CHMC1-2014

Yamabe, J., Matsunaga, H., Furuya, Y., Hamada, S., Itoga, H., Yoshikawa, M., Takeuchi, E. & Matsuoka, S., 1 5 2015, : : International Journal of Hydrogen Energy. 40, 1, p. 719-728 10 p.

研究成果: Contribution to journalArticle

29 引用 (Scopus)
13 引用 (Scopus)
2014

Fatigue-life and leak-before-break assessments of CR-MO steel pressure vessels with high-pressure gaseous hydrogen

Yamabe, J., Itoga, H., Awane, T., Matsunaga, H., Hamada, S. & Matsuoka, S., 1 1 2014, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; 巻数 6B).

研究成果: Chapter in Book/Report/Conference proceedingConference contribution

6 引用 (Scopus)
2 引用 (Scopus)

Proposal for an engineering definition of a fatigue crack initiation unit for evaluating the fatigue limit on the basis of crystallographic analysis of pearlitic steel

Fujisawa, T., Hamada, S., Koga, N., Sasaki, D., Tsuchiyama, T., Nakada, N., Takashima, K., Ueda, M. & Noguchi, H., 1 1 2014, : : International Journal of Fracture. 185, 1-2, p. 17-29 13 p.

研究成果: Contribution to journalArticle

4 引用 (Scopus)

Strain mapping with high spatial resolution across a wide observation range by digital image correlation on plastic replicas

Hamada, S., Fujisawa, T., Koyama, M., Koga, N., Nakada, N., Tsuchiyama, T., Ueda, M. & Noguchi, H., 12 2014, : : Materials Characterization. 98, p. 140-146 7 p.

研究成果: Contribution to journalArticle

13 引用 (Scopus)

Tensile-and fatigue-properties of low alloy steel JIS-SCM435 and carbon steel JIS-SM490B in 115 MPA hydrogen gas

Matsunaga, H., Yoshikawa, M., Itoga, H., Yamabe, J., Hamada, S. & Matsuoka, S., 1 1 2014, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; 巻数 6B).

研究成果: Chapter in Book/Report/Conference proceedingConference contribution

3 引用 (Scopus)
2013
11 引用 (Scopus)
6 引用 (Scopus)

Measurement of effective stress intensity factor range of mode II fatigue crack growth using hysteresis loop

Hamada, S. & Liu, M., 1 1 2013, p. 1717-1723. 7 p.

研究成果: Contribution to conferencePaper

Pre-strain effect on fatigue strength characteristics of SUH660 plain specimens

Wu, H., Hamada, S. & Noguchi, H., 1 1 2013, : : International Journal of Fatigue. 55, p. 291-298 8 p.

研究成果: Contribution to journalArticle

6 引用 (Scopus)

Simple calculation method for stress concentration and stress intensity of T-shaped member

Hamada, S., Ueda, M., Hayashi, K. & Noguchi, H., 10 1 2013, : : International Journal of Mechanical Sciences. 75, p. 8-15 8 p.

研究成果: Contribution to journalArticle

3 引用 (Scopus)
2012

Determination of effective stress intensity factor range of mode ii fatigue crack propagation using improved experimental method

Liu, M. & Hamada, S., 1 1 2012, 19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012. European Conference on Fracture, ECF, (19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012).

研究成果: Chapter in Book/Report/Conference proceedingConference contribution