• 276 引用
  • 8 h指数
1994 …2020

年単位の研究成果

Pureに変更を加えた場合、すぐここに表示されます。

研究成果

フィルター
Article
2020

Effects of hydrogen content that alters damage evolution mechanisms in SUH 660 precipitation-strengthened Fe–Cr–Ni steel

Verma, V. K., Koyama, M., Hamada, S. & Akiyama, E., 7 22 2020, : : Materials Science and Engineering A. 791, 139750.

研究成果: Contribution to journalArticle

1 引用 (Scopus)

Fatigue crack propagation modes: plastic deformation mode and damage accumulation mode

Hamada, S., Zhang, K., Koyama, M., Ueda, M. & Noguchi, H., 3 1 2020, : : International Journal of Fracture. 222, 1-2, p. 111-122 12 p.

研究成果: Contribution to journalArticle

1 引用 (Scopus)

Planar slip-driven fatigue crack initiation and propagation in an equiatomic CrMnFeCoNi high-entropy alloy

Suzuki, K., Koyama, M., Hamada, S., Tsuzaki, K. & Noguchi, H., 4 2020, : : International Journal of Fatigue. 133, 105418.

研究成果: Contribution to journalArticle

3 引用 (Scopus)

Plastic deformation sequence and strain gradient characteristics of hydrogen-induced delayed crack propagation in single-crystalline Fe–Si alloy

Huynh, T. T., Koyama, M., Takahashi, Y., Hamada, S., Tsuzaki, K. & Noguchi, H., 3 15 2020, : : Scripta Materialia. 178, p. 99-103 5 p.

研究成果: Contribution to journalArticle

2019

Mode I fatigue crack growth induced by strain-aging in precipitation-hardened aluminum alloys

Anis, S. F., Koyama, M., Hamada, S. & Noguchi, H., 12 2019, : : Theoretical and Applied Fracture Mechanics. 104, 102340.

研究成果: Contribution to journalArticle

3 引用 (Scopus)

Weakest region analysis of non-combustible Mg products fabricated by selective laser melting

Proaño, B., Miyahara, H., Matsumoto, T., Hamada, S., Sakai, H., Ogawa, K., Suyalatu & Noguchi, H., 10 2019, : : Theoretical and Applied Fracture Mechanics. 103, 102291.

研究成果: Contribution to journalArticle

1 引用 (Scopus)
2018

Dependence of fatigue limit on step height for stepped 0.45% carbon steel with singular stress field

Hamada, S., Moriyama, T. & Noguchi, H., 2 1 2018, : : Engineering Fracture Mechanics. 188, p. 20-35 16 p.

研究成果: Contribution to journalArticle

1 引用 (Scopus)
3 引用 (Scopus)

Effect of shear-affected zone on fatigue crack propagation mode

Hamada, S., Zhang, K., Zhang, J., Koyama, M., Yokoi, T. & Noguchi, H., 11 2018, : : International Journal of Fatigue. 116, p. 36-47 12 p.

研究成果: Contribution to journalArticle

2 引用 (Scopus)

Roughness-induced stress shielding effect in fatigue crack propagation under Mode II loading

Hamada, S., Suemasu, T., Fukudome, S., Koyama, M., Ueda, M. & Noguchi, H., 11 2018, : : International Journal of Fatigue. 116, p. 245-256 12 p.

研究成果: Contribution to journalArticle

2 引用 (Scopus)
2017
8 引用 (Scopus)

Material property controlling non-propagating fatigue crack length of mechanically and physically short-crack based on Dugdale-model analysis

Fukumura, N., Li, B., Koyama, M., Suzuki, T., Hamada, S., Tsuzaki, K. & Noguchi, H., 8 1 2017, : : Theoretical and Applied Fracture Mechanics. 90, p. 193-202 10 p.

研究成果: Contribution to journalArticle

4 引用 (Scopus)

Re-Examination of Correlation between Hardness and Tensile Properties by Numerical Analysis

Hamada, S., Nakanishi, M., Moriyama, T. & Noguchi, H., 6 1 2017, : : Experimental Mechanics. 57, 5, p. 773-781 9 p.

研究成果: Contribution to journalArticle

2 引用 (Scopus)
7 引用 (Scopus)
2016

Notch sensitivity of the fatigue limit in high-strength steel

Hamano, Y., Koyama, M., Hamada, S. & Noguchi, H., 1 1 2016, : : isij international. 56, 8, p. 1480-1486 7 p.

研究成果: Contribution to journalArticle

4 引用 (Scopus)
2015

Effect of internal hydrogen on very high cycle fatigue of precipitation-strengthened steel SUH660

Wu, H., Hamada, S., Oda, Y. & Noguchi, H., 1 1 2015, : : International Journal of Fatigue. 70, p. 406-416 11 p.

研究成果: Contribution to journalArticle

2 引用 (Scopus)

Mechanical examination of crack length dependency and material dependency on threshold stress intensity factor range with Dugdale model

Fukumura, N., Suzuki, T., Hamada, S., Tsuzaki, K. & Noguchi, H., 2 1 2015, : : Engineering Fracture Mechanics. 135, p. 168-186 19 p.

研究成果: Contribution to journalArticle

17 引用 (Scopus)

Notch sensitivity in fatigue limit of high strength steel

Hamano, Y., Koyama, M., Hamada, S. & Noguchi, H., 1 1 2015, : : Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan. 101, 10, p. 552-558 7 p.

研究成果: Contribution to journalArticle

Qualification of chromium-molybdenum steel based on the safety factor multiplier method in CHMC1-2014

Yamabe, J., Matsunaga, H., Furuya, Y., Hamada, S., Itoga, H., Yoshikawa, M., Takeuchi, E. & Matsuoka, S., 1 5 2015, : : International Journal of Hydrogen Energy. 40, 1, p. 719-728 10 p.

研究成果: Contribution to journalArticle

29 引用 (Scopus)
13 引用 (Scopus)
2014
2 引用 (Scopus)

Proposal for an engineering definition of a fatigue crack initiation unit for evaluating the fatigue limit on the basis of crystallographic analysis of pearlitic steel

Fujisawa, T., Hamada, S., Koga, N., Sasaki, D., Tsuchiyama, T., Nakada, N., Takashima, K., Ueda, M. & Noguchi, H., 1 1 2014, : : International Journal of Fracture. 185, 1-2, p. 17-29 13 p.

研究成果: Contribution to journalArticle

4 引用 (Scopus)

Strain mapping with high spatial resolution across a wide observation range by digital image correlation on plastic replicas

Hamada, S., Fujisawa, T., Koyama, M., Koga, N., Nakada, N., Tsuchiyama, T., Ueda, M. & Noguchi, H., 12 2014, : : Materials Characterization. 98, p. 140-146 7 p.

研究成果: Contribution to journalArticle

13 引用 (Scopus)
2013
11 引用 (Scopus)
6 引用 (Scopus)

Pre-strain effect on fatigue strength characteristics of SUH660 plain specimens

Wu, H., Hamada, S. & Noguchi, H., 1 1 2013, : : International Journal of Fatigue. 55, p. 291-298 8 p.

研究成果: Contribution to journalArticle

6 引用 (Scopus)

Simple calculation method for stress concentration and stress intensity of T-shaped member

Hamada, S., Ueda, M., Hayashi, K. & Noguchi, H., 10 1 2013, : : International Journal of Mechanical Sciences. 75, p. 8-15 8 p.

研究成果: Contribution to journalArticle

3 引用 (Scopus)
2011

Characteristic of threshold stress intensity factor range for small crack on magnesium alloys

Ishina, T., Morishige, K., Hamada, S. & Noguchi, H., 1 1 2011, : : Procedia Engineering. 10, p. 1285-1290 6 p.

研究成果: Contribution to journalArticle

Evaluation of fatigue limit characteristics of lamellar pearlitic steel in consideration of microstructure

Hamada, S., Sakoda, Y., Sasaki, D., Ueda, M. & Noguchi, H., 9 1 2011, : : Zairyo/Journal of the Society of Materials Science, Japan. 60, 9, p. 790-795 6 p.

研究成果: Contribution to journalArticle

5 引用 (Scopus)

Fatigue limit evaluation considering crack initiation for lamellar pearlitic steel

Hamada, S., Sasaki, D., Ueda, M. & Noguchi, H., 1 1 2011, : : Procedia Engineering. 10, p. 1467-1472 6 p.

研究成果: Contribution to journalArticle

12 引用 (Scopus)
6 引用 (Scopus)

Measurement of effective stress intensity factor range of Mode II fatigue crack propagation

Liu, M. & Hamada, S., 1 1 2011, : : Procedia Engineering. 10, p. 1949-1954 6 p.

研究成果: Contribution to journalArticle

5 引用 (Scopus)

Method of evaluation of distribution characteristics of flaky inclusions

Hayashi, K., Hamada, S., Matsumoto, T., Sakamoto, M. & Noguchi, H., 7 2011, : : Strength of Materials. 43, 4, p. 411-416 6 p.

研究成果: Contribution to journalArticle

公開
2010
1 引用 (Scopus)
2009

Analysis of small spalling mechanism on hot rolling mill roll surface

Sonoda, A., Hamada, S. & Noguchi, H., 3 23 2009, : : Memoirs of the Faculty of Engineering, Kyushu University. 69, 1, p. 1-14 14 p.

研究成果: Contribution to journalArticle

4 引用 (Scopus)
2 引用 (Scopus)