疲労限度特性から求める継手溶接条件に対する簡易決定法の提案: 第1報,難燃性マグネシウム合金TIG突合せ溶接継手への応用

繁 濱田; 宇昭 川添; 功明 林; 春美 森田; 光二 上田; 満 坂本; 博司 野口

doi:10.1299/kikaia.76.1626

疲労限度特性から求める継手溶接条件に対する簡易決定法の提案: 第1報,難燃性マグネシウム合金TIG突合せ溶接継手への応用

濱田繁, 川添宇昭, 林功明, 森田春美, 上田光二, 坂本満, 野口博司

材料力学

研究成果: ジャーナルへの寄稿 › 学術誌 › 査読

抄録

The non-combustible Mg alloy is useful for structural material because of the high specific strength and the high ignition point, but the suitable welding condition was not established for manufacturing floor. In this study, a simple evaluation method for fatigue limit characteristics of welded joint was proposed, using the edge shape of welding bead geometry, the inner defect size and the material characteristics. Moreover, the welding condition ranges to ensure a stable fatigue limit for TIG butt joint of non-combustible Mg alloy were proposed by using this method.

寄稿の翻訳タイトル	Proposal of Simple Determination Method for Welding Condition of Joint from Fatigue Limit Characteristics: 1st Report, Application to TIG-Butt-Joint of Non-Combustible Mg Alloy
本文言語	日本語
ページ（範囲）	1626-1635
ページ数	10
ジャーナル	Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A
巻	76
号	772
DOI	https://doi.org/10.1299/kikaia.76.1626
出版ステータス	出版済み - 2010

文献へのアクセス

10.1299/kikaia.76.1626

フィンガープリント

「疲労限度特性から求める継手溶接条件に対する簡易決定法の提案: 第1報,難燃性マグネシウム合金TIG突合せ溶接継手への応用」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル

濱田繁, 川添宇昭, 林功明, 森田春美, 上田光二, 坂本満, & 野口博司 (2010). 疲労限度特性から求める継手溶接条件に対する簡易決定法の提案: 第1報,難燃性マグネシウム合金TIG突合せ溶接継手への応用. Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, 76(772), 1626-1635. https://doi.org/10.1299/kikaia.76.1626

疲労限度特性から求める継手溶接条件に対する簡易決定法の提案 : 第1報,難燃性マグネシウム合金TIG突合せ溶接継手への応用. / 濱田繁; 川添宇昭; 林功明その他.

In: Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, Vol. 76, No. 772, 2010, p. 1626-1635.

研究成果: ジャーナルへの寄稿 › 学術誌 › 査読

濱田繁, 川添宇昭, 林功明, 森田春美, 上田光二, 坂本満 & 野口博司 2010, '疲労限度特性から求める継手溶接条件に対する簡易決定法の提案: 第1報,難燃性マグネシウム合金TIG突合せ溶接継手への応用', Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, vol. 76, no. 772, pp. 1626-1635. https://doi.org/10.1299/kikaia.76.1626

濱田繁, 川添宇昭, 林功明, 森田春美, 上田光二, 坂本満その他. 疲労限度特性から求める継手溶接条件に対する簡易決定法の提案: 第1報,難燃性マグネシウム合金TIG突合せ溶接継手への応用. Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A. 2010;76(772):1626-1635. https://doi.org/10.1299/kikaia.76.1626

@article{fd0df1fdf042462f998394ce613d431f,

title = "疲労限度特性から求める継手溶接条件に対する簡易決定法の提案: 第1報,難燃性マグネシウム合金TIG突合せ溶接継手への応用",

abstract = "The non-combustible Mg alloy is useful for structural material because of the high specific strength and the high ignition point, but the suitable welding condition was not established for manufacturing floor. In this study, a simple evaluation method for fatigue limit characteristics of welded joint was proposed, using the edge shape of welding bead geometry, the inner defect size and the material characteristics. Moreover, the welding condition ranges to ensure a stable fatigue limit for TIG butt joint of non-combustible Mg alloy were proposed by using this method.",

author = "繁濱田 and 宇昭川添 and 功明林 and 春美森田 and 光二上田 and 満坂本 and 博司野口",

year = "2010",

doi = "10.1299/kikaia.76.1626",

language = "日本語",

volume = "76",

pages = "1626--1635",

journal = "Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A",

issn = "0387-5008",

publisher = "一般社団法人日本機械学会",

number = "772",

}

TY - JOUR

T1 - 疲労限度特性から求める継手溶接条件に対する簡易決定法の提案

T2 - 第1報,難燃性マグネシウム合金TIG突合せ溶接継手への応用

AU - 濱田, 繁

AU - 川添, 宇昭

AU - 林, 功明

AU - 森田, 春美

AU - 上田, 光二

AU - 坂本, 満

AU - 野口, 博司

PY - 2010

Y1 - 2010

N2 - The non-combustible Mg alloy is useful for structural material because of the high specific strength and the high ignition point, but the suitable welding condition was not established for manufacturing floor. In this study, a simple evaluation method for fatigue limit characteristics of welded joint was proposed, using the edge shape of welding bead geometry, the inner defect size and the material characteristics. Moreover, the welding condition ranges to ensure a stable fatigue limit for TIG butt joint of non-combustible Mg alloy were proposed by using this method.

AB - The non-combustible Mg alloy is useful for structural material because of the high specific strength and the high ignition point, but the suitable welding condition was not established for manufacturing floor. In this study, a simple evaluation method for fatigue limit characteristics of welded joint was proposed, using the edge shape of welding bead geometry, the inner defect size and the material characteristics. Moreover, the welding condition ranges to ensure a stable fatigue limit for TIG butt joint of non-combustible Mg alloy were proposed by using this method.

U2 - 10.1299/kikaia.76.1626

DO - 10.1299/kikaia.76.1626

M3 - 学術誌

VL - 76

SP - 1626

EP - 1635

JO - Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A

JF - Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A

SN - 0387-5008

IS - 772

ER -