非金属介在物 - 溶融 Fe および溶融 Fe-18%Cr-9%Ni 合金間の界面エネルギー評価

研究成果: ジャーナルへの寄稿学術誌査読

抄録

The contact angles between three non-metallic inclusion-type oxide substrates, viz. Al2O3, MgO, and MgO·Al2O3, and molten Fe and molten Fe-based stainless steel (Fe-Cr-Ni alloy) were measured using the sessile drop method in Ar atmosphere at 1873 K. The contact angles between molten Fe and oxide substrates ranged between 111° and 117°, while that between molten Fe-Cr-Ni alloy and substrates ranged between 103° and 105°. The angles between the alloy and each of the substrates were smaller than the corresponding values for Fe, which was attributed to the superior wettability of molten Fe-Cr-Ni alloy on the substrates. The wettability of the molten materials is related to the interfacial tension between the molten metals and each substrate. Thus, the interfacial tension between the molten metals and the non-metallic substrates was quantitatively evaluated using Young’s equation and the measured contact angles; the interfacial tension for molten Fe ranged from 1.862 to 2.781 N·m−1, while that for molten Fe-Cr-Ni alloy ranged from 1.513 to 2.286 N·m−1. Owing to the higher reactivity between molten Fe-Cr-Ni alloy and the substrates, the interfacial tension and energy between them were lower than those between molten Fe and the substrates.

寄稿の翻訳タイトルEvaluation of Interfacial Energy between Molten Fe and Fe-18%Cr-9%Ni Alloy and Non-Metallic Inclusion-Type Oxides
本文言語日本語
ページ(範囲)560-571
ページ数12
ジャーナルTetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan
108
8
DOI
出版ステータス出版済み - 8月 2022

!!!All Science Journal Classification (ASJC) codes

  • 凝縮系物理学
  • 物理化学および理論化学
  • 金属および合金
  • 材料化学

フィンガープリント

「非金属介在物 - 溶融 Fe および溶融 Fe-18%Cr-9%Ni 合金間の界面エネルギー評価」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル