1P1-X02 最大筋力を考慮した筋骨格システムの位置制御

中川 大輔, 松谷 祐希, 木野 仁, 田原 健二

研究成果: Contribution to journalArticle

抄録

This paper proposes a set-point control method for a musculoskeletal system considering maximum muscular force. In our previous work, the set-point control method for a musculoskeletal system was proposed which combines a feedforward control with a sensory feedback control including a considerable time-delay. However, the maximum output force of each muscle have not been considered though it sometimes induces a wind-up phenomenon because of the saturation of the muscular force. The ratio function to determine the ratio of feedforward and feedback control inputs is newly introduced in this paper to prevent such a wind-up phenomenon without the saturation of muscular force, and generate more sophisticated reaction motion even if disturbances are added on the end-point during movement. Numerical simulation results are shown to demonstrate the effectiveness of the proposed method.
寄稿の翻訳タイトル1P1-X02 Set-point Control of a Musculoskeletal System Considering Maximum Muscular Force
本文言語Japanese
ページ(範囲)"1P1-X02(1)"-"1P1-X02(4)"
ジャーナルロボティクス・メカトロニクス講演会講演概要集
2015
出版ステータス出版済み - 5 17 2015

フィンガープリント 「1P1-X02 最大筋力を考慮した筋骨格システムの位置制御」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル