3D acquisition system using uncalibrated line-laser projector

Hiroshi Kawasaki, Ryo Furukawa, Yasuaki Nakamura

研究成果: Chapter in Book/Report/Conference proceedingConference contribution

5 被引用数 (Scopus)

抄録

In this paper, we propose a new 3D scanner, which is easy to operate. Till date several 3D scanners, including commercial products, are available; however, most of these are usually large, heavy, and expensive. Although inexpensive 3D scanners manufactured using vision-based techniques, such as stereo vision, are available, they cannot be used in actual measurements because the techniques are still being researched. Our proposed scanner consists of only a laser projector and a single camera and is based on the self-calibarating technique; thus it does not require both precalibration and expensive mechanical devices. This implies that the system to be low-cost and the occlusions can be effectively reduced by moving the projector while scanning. Experiments of our method were performed using both synthesized and real data and the 3D information of the scene was successfully reconstructed.

本文言語英語
ホスト出版物のタイトルProceedings - 18th International Conference on Pattern Recognition, ICPR 2006
ページ1071-1075
ページ数5
DOI
出版ステータス出版済み - 12 1 2006
外部発表はい
イベント18th International Conference on Pattern Recognition, ICPR 2006 - Hong Kong, 中国
継続期間: 8 20 20068 24 2006

出版物シリーズ

名前Proceedings - International Conference on Pattern Recognition
1
ISSN(印刷版)1051-4651

その他

その他18th International Conference on Pattern Recognition, ICPR 2006
国/地域中国
CityHong Kong
Period8/20/068/24/06

All Science Journal Classification (ASJC) codes

  • コンピュータ ビジョンおよびパターン認識

フィンガープリント

「3D acquisition system using uncalibrated line-laser projector」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル