3D cosmic-ray muon tomography using portable muography detector

K. Chaiwongkhot, T. Kin, Y. Nagata, T. Komori, N. Okamoto, H. Basiri

研究成果: ジャーナルへの寄稿学術誌査読

1 被引用数 (Scopus)

抄録

A feasibility demonstration of three-dimensional (3D) muon tomography was performed for infrastructure equivalent targets using the proposed portable muography detector. For the target, we used two sets of lead blocks placed at different heights. The detector consists of two muon position-sensitive detectors, made of plastic scintillating fibers (PSFs) and multi-pixel photon counters (MPPCs) with an angular resolution of 8 msr. In this work, the maximum likelihood-expectation maximization (ML-EM) method was used for the 3D imaging reconstruction of the muography. For both simulation and experiment, the reconstructed positions of the blocks produce consistent results with prior knowledge of the blocks' arrangement. This result demonstrates the potential of the 3D tomographic imaging of infrastructure by using seven detection positions for portable muography detectors to image infrastructure scale targets.

本文言語英語
論文番号P01009
ジャーナルJournal of Instrumentation
17
1
DOI
出版ステータス出版済み - 1月 2022

!!!All Science Journal Classification (ASJC) codes

  • 数理物理学
  • 器械工学

フィンガープリント

「3D cosmic-ray muon tomography using portable muography detector」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル