研究成果の検索

検索コンセプト
選択されたフィルター

出版年

  • 2018
  • 2017
  • 2016
  • 2015
  • 2014
  • 2013
  • 2012
  • 2010

著者

  • Masato Furukawa
2018

Flow structure and unsteady behavior of hub-corner separation in a stator cascade of a multi-stage transonic axial compressor

Saito, S., Yamada, K., Furukawa, M., Watanabe, K., Matsuoka, A. & Niwa, N., 1 1 2018, Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; 巻数 2A-2018).

研究成果: 著書/レポートタイプへの貢献会議での発言

3 引用 (Scopus)
4 引用 (Scopus)

The role of meridional geometry in aerodynamic design of centrifugal compressor

Ito, S., Furukawa, M., Yamada, K., Manabe, K., Oka, N., Tomita, I. & Hayashi, Y., 1 1 2018, Fluid Machinery; Erosion, Slurry, Sedimentation; Experimental, Multiscale, and Numerical Methods for Multiphase Flows; Gas-Liquid, Gas-Solid, and Liquid-Solid Flows; Performance of Multiphase Flow Systems; Micro/Nano-Fluidics. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM; 巻数 3).

研究成果: 著書/レポートタイプへの貢献会議での発言

1 引用 (Scopus)
2017

A study on unsteady flow phenomena at near-stall in a multi-stage axial flow compressor by large-scale DES with K computer

Yamada, K., Furukawa, M., Nakakido, S., Tamura, Y., Matsuoka, A. & Nakayama, K., 2 1 2017, : : International Journal of Gas Turbine, Propulsion and Power Systems. 9, 1, p. 18-26 9 p.

研究成果: ジャーナルへの寄稿記事

1 引用 (Scopus)

Evolution of reverse flow in a transonic centrifugal compressor at near-surge

Yamada, K., Furukawa, M., Arai, H. & Kanzaki, D., 1 1 2017, Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; 巻数 2C-2017).

研究成果: 著書/レポートタイプへの貢献会議での発言

2 引用 (Scopus)

Large-scale detached-eddy simulation analysis of stall inception process in a multistage axial flow compressor

Yamada, K., Furukawa, M., Tamura, Y., Saito, S., Matsuoka, A. & Nakayama, K., 7 1 2017, : : Journal of Turbomachinery. 139, 7, 071002.

研究成果: ジャーナルへの寄稿記事

8 引用 (Scopus)

Optimum aerodynamic design of centrifugal compressor impeller using an inverse method based on meridional viscous flow analysis

Oka, N., Furukawa, M., Yamada, K., Itou, S., Ibaraki, S., Iwakiri, K. & Hayashi, Y., 1 1 2017, Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; 巻数 2C-2017).

研究成果: 著書/レポートタイプへの貢献会議での発言

3 引用 (Scopus)

Optimum aerodynamic design of centrifugal comPressor using a genetic algorithm and an inverse method based on meridional viscous flow analysis

Itou, S., Oka, N., Furukawa, M., Yamada, K., Ibaraki, S., Iwakiri, K. & Hayashi, Y., 1 1 2017.

研究成果: 会議への寄与タイプ論文

Optimum aerodynamic design of centrifugal comPressor using a genetic algorithm and an inverse method based on meridional viscous flow analysis

Itou, S., Oka, N., Furukawa, M., Yamada, K., Ibaraki, S., Iwakiri, K. & Hayashi, Y., 1 1 2017.

研究成果: 会議への寄与タイプ論文

Study on influence of blade number on aerodynamic noise of half-ducted propeller fans for packaged air-conditioners

Iwase, T., Kishitani, T. & Furukawa, M., 10 1 2017, : : International Journal of Fluid Machinery and Systems. 10, 4, p. 318-327 10 p., O16044C.

研究成果: ジャーナルへの寄稿記事

4 引用 (Scopus)

Vortical flow structure of hub-corner separation in a stator cascade of a multi-stage transonic axial compressor

Saito, S., Furukawa, M., Yamada, K., Tamura, Y., Matsuoka, A. & Niwa, N., 1 1 2017, Symposia: Keynotes; Advances in Numerical Modeling for Turbomachinery Flow Optimization; Fluid Machinery; Industrial and Environmental Applications of Fluid Mechanics; Pumping Machinery. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM; 巻数 1A-2017).

研究成果: 著書/レポートタイプへの貢献会議での発言

1 引用 (Scopus)
2016

Direct numerical simulation of turbulent flow and aeroacoustic fields around an airfoil using lattice boltzmann method

Kusano, K., Yamada, K., Furukawa, M. & Moon, K. J., 1 1 2016, Symposia: Turbomachinery Flow Simulation and Optimization; Applications in CFD; Bio-Inspired and Bio-Medical Fluid Mechanics; CFD Verification and Validation; Development and Applications of Immersed Boundary Methods; DNS, LES and Hybrid RANS/LES Methods; Fluid Machinery; Fluid-Structure Interaction and Flow-Induced Noise in Industrial Applications; Flow Applications in Aerospace; Active Fluid Dynamics and Flow Control - Theory, Experiments and Implementation. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM; 巻数 1A-2016).

研究成果: 著書/レポートタイプへの貢献会議での発言

1 引用 (Scopus)

Large-scale des analysis of stall inception process in a multi-stage axial flow compressor

Yamada, K., Furukawa, M., Tamura, Y., Saito, S., Matsuoka, A. & Nakayama, K., 1 1 2016, Turbomachinery. American Society of Mechanical Engineers (ASME), 巻 2D-2016.

研究成果: 著書/レポートタイプへの貢献会議での発言

2 引用 (Scopus)
2015

Aerodynamic performances and flow fields of pareto optimal solutions in an aerodynamic design of a wind-lens turbine

Oka, N., Furukawa, M., Yamada, K., Oka, A. & Kurokawa, Y., 1 1 2015, Oil and Gas Applications; Supercritical CO2 Power Cycles; Wind Energy. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; 巻数 9).

研究成果: 著書/レポートタイプへの貢献会議での発言

Effects of flow path height of impeller exit and diffuser on flow fields in a transonic centrifugal compressor

Tomita, I., Ibaraki, S., Wakashima, K., Furukawa, M., Yamada, K. & Kanzaki, D., 1 1 2015, Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; 巻数 2C).

研究成果: 著書/レポートタイプへの貢献会議での発言

1 引用 (Scopus)

Large-scale des analysis of unsteady flow field in a multi-stage axial flow compreßor at off-design condition using k computer

Yamada, K., Furukawa, M., Nakakido, S., Matsuoka, A. & Nakayama, K., 1 1 2015, Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; 巻数 2C).

研究成果: 著書/レポートタイプへの貢献会議での発言

9 引用 (Scopus)

Measurement technique for unsteady low-speed flow fields using poly(TMSP)-based pressure sensitive paint

Mori, H., Maeda, K., Furukawa, M. & Akiyoshi, M., 1 1 2015.

研究成果: 会議への寄与タイプ論文

Numerical analysis of unsteady three-dimensional flow in a propeller fan using multi-scale lattice boltzmann method

Kusano, K., Yamada, K. & Furukawa, M., 1 1 2015, FAN 2015 - International Conference on Fan Noise, Technology and Numerical Methods. Institution of Mechanical Engineers, 巻 2015-April.

研究成果: 著書/レポートタイプへの貢献会議での発言

2014

Simultaneous optimization of rotor blade and wind-lens for aerodynamic design of wind-lens turbine

Oka, N., Furukawa, M., Yamada, K., Kawamitsu, K., Kido, K. & Oka, A., 1 1 2014, ASME Turbo Expo 2014: Turbine Technical Conference and Exposition, GT 2014. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; 巻数 3B).

研究成果: 著書/レポートタイプへの貢献会議での発言

4 引用 (Scopus)

Suppression of secondary flows in an axial flow turbine rotor with a novel blade design concept

Yamada, K., Furukawa, M., Shibata, T., Nakakido, S. & Oka, N., 1 1 2014, Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; 巻数 2C).

研究成果: 著書/レポートタイプへの貢献会議での発言

1 引用 (Scopus)
2013

Aerodynamic design for wind-lens turbine using optimization technique

Oka, N., Furukawa, M., Yamada, K. & Kido, K., 12 1 2013, ASME 2013 Fluids Engineering Division Summer Meeting, FEDSM 2013. V01AT02A009. (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM; 巻数 1 A).

研究成果: 著書/レポートタイプへの貢献会議での発言

6 引用 (Scopus)

Effects of tip clearance flow on rotating stall inception process in an axial compressor rotor

Yamada, K., Kikuta, H., Furukawa, M., Gunjishima, S. & Hara, Y., 7 15 2013, : : Nihon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B. 79, 801, p. 900-916 17 p.

研究成果: ジャーナルへの寄稿記事

1 引用 (Scopus)

Effects of tip clearance on the stall inception process in an axial compressor rotor

Yamada, K., Kikuta, H., Furukawa, M., Gunjishima, S. & Hara, Y., 12 17 2013, ASME Turbo Expo 2013: Turbine Technical Conference and Exposition, GT 2013. GT2013-95479. (Proceedings of the ASME Turbo Expo; 巻数 6 C).

研究成果: 著書/レポートタイプへの貢献会議での発言

27 引用 (Scopus)

The effect of tip leakage vortex for operating range enhancement of centrifugal compressor

Tomita, I., Ibaraki, S., Furukawa, M. & Yamada, K., 6 28 2013, : : Journal of Turbomachinery. 135, 3, 051020.

研究成果: ジャーナルへの寄稿記事

17 引用 (Scopus)

Toward direct numerical simulation of aeroacoustic field around airfoil using multi-scale lattice boltzmann method

Kusano, K., Yamada, K. & Furukawa, M., 12 1 2013, ASME 2013 Fluids Engineering Division Summer Meeting, FEDSM 2013. V01AT09A005. (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM; 巻数 1 A).

研究成果: 著書/レポートタイプへの貢献会議での発言

1 引用 (Scopus)
2012

An explanation for flow features of spike-type stall inception in an axial compressor rotor

Yamada, K., Kikuta, H., Iwakiri, K. I., Furukawa, M. & Gunjishima, S., 12 1 2012, ASME Turbo Expo 2012: Turbine Technical Conference and Exposition, GT 2012. PARTS A, B, AND C 版 p. 2663-2675 13 p. (Proceedings of the ASME Turbo Expo; 巻数 8, 番号 PARTS A, B, AND C).

研究成果: 著書/レポートタイプへの貢献会議での発言

6 引用 (Scopus)

An Explanation for Flow Features of Spike-Type Stall Inception in an Axial Compressor Rotor

Yamada, K., Kikuta, H., Iwakiri, K. I., Furukawa, M. & Gunjishima, S., 11 5 2012, : : Journal of Turbomachinery. 135, 2, 021023.

研究成果: ジャーナルへの寄稿記事

70 引用 (Scopus)

Development of advanced centrifugal compressor for turbocharger, applying control of internal unsteady flow structure

Ebisu, M., Shiraishi, T., Tomita, I. & Furukawa, M., 1 1 2012, Institution of Mechanical Engineers - 10th International Conference on Turbochargers and Turbocharging. Woodhead Publishing Limited, p. 135-144 10 p.

研究成果: 著書/レポートタイプへの貢献会議での発言

3 引用 (Scopus)

The effect of tip leakage vortex for operating range enhancement of centrifugal compressor

Tomita, I., Ibaraki, S., Furukawa, M. & Yamada, K., 12 1 2012, ASME Turbo Expo 2012: Turbine Technical Conference and Exposition, GT 2012. PARTS A, B, AND C 版 p. 735-743 9 p. (Proceedings of the ASME Turbo Expo; 巻数 8, 番号 PARTS A, B, AND C).

研究成果: 著書/レポートタイプへの貢献会議での発言

3 引用 (Scopus)
2010

Comparative study on tip clearance flow fields in two types of transonic centrifugal compressor impeller with splitter blades

Yamada, K., Tamagawa, Y., Fukushima, H., Furukawa, M., Ibaraki, S. & Iwakiri, K. I., 12 1 2010, ASME Turbo Expo 2010: Power for Land, Sea, and Air, GT 2010. PARTS A, B, AND C 版 p. 2053-2063 11 p. (Proceedings of the ASME Turbo Expo; 巻数 7, 番号 PARTS A, B, AND C).

研究成果: 著書/レポートタイプへの貢献会議での発言

11 引用 (Scopus)