A -192.7-dBc/Hz FoM KU-Band VCO Using a DGS Resonator With a High-Band Transmission Pole in 0.18-μm CMOS Technology

研究成果: Contribution to journalArticle査読

1 被引用数 (Scopus)

抄録

This letter presents the improvement of the phase noise (PN) of a voltage-controlled oscillator (VCO) by using a defected ground structure (DGS) resonator with a high-band transmission pole. The proposed DGS resonator has two loops in a coplanar stripline topology. The outer loop is loaded by a series capacitance, which produces the high-band transmission pole. The overall combination has a parallel capacitor to generate the necessary parallel resonance for the VCO operation. This proposed DGS resonator has a sharper impedance and frequency response slope, which results in an improved quality factor. In return, utilization of this DGS resonator into a KU-Band VCO reduces its PN. The prototyped VCO in 0.18-μm CMOS oscillates at 15.52 GHz and shows a PN of -111.27 and -134.07 dBc/Hz at 1- and 10-MHz offset, respectively, while consuming 3.3-mW power. The VCO has a frequency tuning range of 9.5%, which results in a figure of merit (FoM) of -192.7 dB.

本文言語英語
ジャーナルIEEE Microwave and Wireless Components Letters
DOI
出版ステータス出版済み - 12 2019

All Science Journal Classification (ASJC) codes

  • Condensed Matter Physics
  • Electrical and Electronic Engineering

フィンガープリント 「A -192.7-dBc/Hz FoM KU-Band VCO Using a DGS Resonator With a High-Band Transmission Pole in 0.18-μm CMOS Technology」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル