A figure-of-eight flexible pickup coil for a magnetostrictive torque sensor

I. Sasada, Y. Etoh, K. Kato

研究成果: ジャーナルへの寄稿記事

6 引用 (Scopus)

抜粋

A new structure of the pickup coil made on a double-layered flexible printed circuit board (PCB) is proposed for a magnetostrictive torque sensor. The pickup coil employs a pair of figure-of-eight coils in which one coil is 90° angle rotated from the other. Each of figure-of-eight coils has 14 turn windings made of 18-μm-thick copper conductor with 100-μm/100-μm line and space. The shape of the coil is a square, and its side length is 15 mm. A torque sensor is constructed by using a shaft with a magnetostrictive sleeve made of a martensitic stainless steel. The pickup coil system was coupled to it with an airgap of 0.3 mm. The performance of the torque sensor is reported.

元の言語英語
ページ(範囲)3309-3311
ページ数3
ジャーナルIEEE Transactions on Magnetics
42
発行部数10
DOI
出版物ステータス出版済み - 10 1 2006

    フィンガープリント

All Science Journal Classification (ASJC) codes

  • Electronic, Optical and Magnetic Materials
  • Electrical and Electronic Engineering

これを引用