A geochemical clogging model with carbonate precipitation rates under hydrothermal conditions

Seung Youl Yoo, Yoshihiro Kuroda, Yoshitada Mito, Toshifumi Matsuoka, Masami Nakagawa, Akiko Ozawa, Kazutoshi Sugiyama, Akira Ueda

研究成果: Contribution to journalArticle査読

8 被引用数 (Scopus)


A step-wise numerical calculation method was developed to provide predictions of when and where carbonate deposits might be found through reservoirs during CO2 sequestration. Flow experiments through porous media using a supersaturated carbonate fluid were also performed in order to observe flow rates. In order to evaluate precipitation rates and permeability change in the formation, calculated flow rates based on the proposed geochemical clogging model were compared with the experimentally observed data. Both high and low temperature cases were studied to understand how hydrothermal conditions can affect precipitation rates of carbonate. According to chemical kinetics, growth rates of minerals are generally proportional to the saturation index (S.I.) that depends on temperature. Thus, a supersaturated fluid has the advantage of improving the filtration and the amount of C fixation (σ). However, when the ratio of filtration coefficient (λ) to pore fluid velocity (u) increases, the permeability around the injection point tends to be significantly reduced by carbonate accumulation, and thus, this might result in insufficient injection of CO2. Therefore, it is essential to understand how to control both λ and u so that the precipitation of carbonate can be located as far away from the inlet as possible.

ジャーナルApplied Geochemistry
出版ステータス出版済み - 3 2013

All Science Journal Classification (ASJC) codes

  • 環境化学
  • 汚染
  • 地球化学および岩石学


「A geochemical clogging model with carbonate precipitation rates under hydrothermal conditions」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。