A new challenge for improvement of recession rate of high density polyethylene fuel and paraffin fuel of hydrid rocket rocket with multi-section swirl injection

Shigeru Aso, Wataru Mitsunaka, Takafumi Matsuzaka, Ryuji Nakawatase, Yasuhiro Tani

研究成果: 著書/レポートタイプへの貢献会議での発言

抄録

In order to improve combustion mechanism of hybrid rocket a new method for enhancement of combustion has been proposed. The new method is to introduce swirling flow throughout fuel grain tube through multi-layer swirl injection ports, which are placed at several locations along fuel grain tube. The key issue is the method to generate swirling flow in the cavity of fuel grain at several cross section. In the outer tube fuel grain tube is located and gaseous oxygen is introduced through holes located in the narrow gap between outer cylinder and inner fuel grain from upstream and oxygen gas in injected into the inner fuel grain cavity through multiple injection ports. At one cross section of fuel grain four injection ports are located at every 90 degrees location with deflected angle where injected oxygen generates swirl at multiple cross section in the fuel grain cavity. The length of fuel grain is 400 mm and at four locations along the axis of fuel grain tube four sets of four injection ports are located. The method has been tested for high density polyethylene fuel and paraffin fuel (FT-0070) with pressurized gaseous oxygen. Several combustion test have been conducted successfully with various injection methods. The results show the recession rate of the new method is 3 times larger for high density polyethylene fuel and 5 times larger for paraffin fuel compared with the conventional method without multi-section swirl injection. The present authors are still conducting combustion experiment intensively and the results will be shown on the Symposium. The results show the new method is quite useful for the increase of the recession rate of paraffin fuel and the increase of the thrust of hybrid rocket engine.

元の言語英語
ホスト出版物のタイトル61st International Astronautical Congress 2010, IAC 2010
ページ2149-2151
ページ数3
3
出版物ステータス出版済み - 2010
イベント61st International Astronautical Congress 2010, IAC 2010 - Prague, チェコ共和国
継続期間: 9 27 201010 1 2010

その他

その他61st International Astronautical Congress 2010, IAC 2010
チェコ共和国
Prague
期間9/27/1010/1/10

Fingerprint

recession
paraffins
High density polyethylenes
Rockets
rockets
Paraffins
polyethylenes
injection
tubes
swirling
Swirling flow
Oxygen
oxygen
cavities
hybrid rocket engines
cross sections
fuel flow
Rocket engines
thrust
upstream

All Science Journal Classification (ASJC) codes

  • Aerospace Engineering
  • Astronomy and Astrophysics

これを引用

Aso, S., Mitsunaka, W., Matsuzaka, T., Nakawatase, R., & Tani, Y. (2010). A new challenge for improvement of recession rate of high density polyethylene fuel and paraffin fuel of hydrid rocket rocket with multi-section swirl injection. : 61st International Astronautical Congress 2010, IAC 2010 (巻 3, pp. 2149-2151)

A new challenge for improvement of recession rate of high density polyethylene fuel and paraffin fuel of hydrid rocket rocket with multi-section swirl injection. / Aso, Shigeru; Mitsunaka, Wataru; Matsuzaka, Takafumi; Nakawatase, Ryuji; Tani, Yasuhiro.

61st International Astronautical Congress 2010, IAC 2010. 巻 3 2010. p. 2149-2151.

研究成果: 著書/レポートタイプへの貢献会議での発言

Aso, S, Mitsunaka, W, Matsuzaka, T, Nakawatase, R & Tani, Y 2010, A new challenge for improvement of recession rate of high density polyethylene fuel and paraffin fuel of hydrid rocket rocket with multi-section swirl injection. : 61st International Astronautical Congress 2010, IAC 2010. 巻. 3, pp. 2149-2151, 61st International Astronautical Congress 2010, IAC 2010, Prague, チェコ共和国, 9/27/10.
Aso S, Mitsunaka W, Matsuzaka T, Nakawatase R, Tani Y. A new challenge for improvement of recession rate of high density polyethylene fuel and paraffin fuel of hydrid rocket rocket with multi-section swirl injection. : 61st International Astronautical Congress 2010, IAC 2010. 巻 3. 2010. p. 2149-2151
Aso, Shigeru ; Mitsunaka, Wataru ; Matsuzaka, Takafumi ; Nakawatase, Ryuji ; Tani, Yasuhiro. / A new challenge for improvement of recession rate of high density polyethylene fuel and paraffin fuel of hydrid rocket rocket with multi-section swirl injection. 61st International Astronautical Congress 2010, IAC 2010. 巻 3 2010. pp. 2149-2151
@inproceedings{07da1ebd417e4cf8ad873634bdc2f018,
title = "A new challenge for improvement of recession rate of high density polyethylene fuel and paraffin fuel of hydrid rocket rocket with multi-section swirl injection",
abstract = "In order to improve combustion mechanism of hybrid rocket a new method for enhancement of combustion has been proposed. The new method is to introduce swirling flow throughout fuel grain tube through multi-layer swirl injection ports, which are placed at several locations along fuel grain tube. The key issue is the method to generate swirling flow in the cavity of fuel grain at several cross section. In the outer tube fuel grain tube is located and gaseous oxygen is introduced through holes located in the narrow gap between outer cylinder and inner fuel grain from upstream and oxygen gas in injected into the inner fuel grain cavity through multiple injection ports. At one cross section of fuel grain four injection ports are located at every 90 degrees location with deflected angle where injected oxygen generates swirl at multiple cross section in the fuel grain cavity. The length of fuel grain is 400 mm and at four locations along the axis of fuel grain tube four sets of four injection ports are located. The method has been tested for high density polyethylene fuel and paraffin fuel (FT-0070) with pressurized gaseous oxygen. Several combustion test have been conducted successfully with various injection methods. The results show the recession rate of the new method is 3 times larger for high density polyethylene fuel and 5 times larger for paraffin fuel compared with the conventional method without multi-section swirl injection. The present authors are still conducting combustion experiment intensively and the results will be shown on the Symposium. The results show the new method is quite useful for the increase of the recession rate of paraffin fuel and the increase of the thrust of hybrid rocket engine.",
author = "Shigeru Aso and Wataru Mitsunaka and Takafumi Matsuzaka and Ryuji Nakawatase and Yasuhiro Tani",
year = "2010",
language = "English",
isbn = "9781617823688",
volume = "3",
pages = "2149--2151",
booktitle = "61st International Astronautical Congress 2010, IAC 2010",

}

TY - GEN

T1 - A new challenge for improvement of recession rate of high density polyethylene fuel and paraffin fuel of hydrid rocket rocket with multi-section swirl injection

AU - Aso, Shigeru

AU - Mitsunaka, Wataru

AU - Matsuzaka, Takafumi

AU - Nakawatase, Ryuji

AU - Tani, Yasuhiro

PY - 2010

Y1 - 2010

N2 - In order to improve combustion mechanism of hybrid rocket a new method for enhancement of combustion has been proposed. The new method is to introduce swirling flow throughout fuel grain tube through multi-layer swirl injection ports, which are placed at several locations along fuel grain tube. The key issue is the method to generate swirling flow in the cavity of fuel grain at several cross section. In the outer tube fuel grain tube is located and gaseous oxygen is introduced through holes located in the narrow gap between outer cylinder and inner fuel grain from upstream and oxygen gas in injected into the inner fuel grain cavity through multiple injection ports. At one cross section of fuel grain four injection ports are located at every 90 degrees location with deflected angle where injected oxygen generates swirl at multiple cross section in the fuel grain cavity. The length of fuel grain is 400 mm and at four locations along the axis of fuel grain tube four sets of four injection ports are located. The method has been tested for high density polyethylene fuel and paraffin fuel (FT-0070) with pressurized gaseous oxygen. Several combustion test have been conducted successfully with various injection methods. The results show the recession rate of the new method is 3 times larger for high density polyethylene fuel and 5 times larger for paraffin fuel compared with the conventional method without multi-section swirl injection. The present authors are still conducting combustion experiment intensively and the results will be shown on the Symposium. The results show the new method is quite useful for the increase of the recession rate of paraffin fuel and the increase of the thrust of hybrid rocket engine.

AB - In order to improve combustion mechanism of hybrid rocket a new method for enhancement of combustion has been proposed. The new method is to introduce swirling flow throughout fuel grain tube through multi-layer swirl injection ports, which are placed at several locations along fuel grain tube. The key issue is the method to generate swirling flow in the cavity of fuel grain at several cross section. In the outer tube fuel grain tube is located and gaseous oxygen is introduced through holes located in the narrow gap between outer cylinder and inner fuel grain from upstream and oxygen gas in injected into the inner fuel grain cavity through multiple injection ports. At one cross section of fuel grain four injection ports are located at every 90 degrees location with deflected angle where injected oxygen generates swirl at multiple cross section in the fuel grain cavity. The length of fuel grain is 400 mm and at four locations along the axis of fuel grain tube four sets of four injection ports are located. The method has been tested for high density polyethylene fuel and paraffin fuel (FT-0070) with pressurized gaseous oxygen. Several combustion test have been conducted successfully with various injection methods. The results show the recession rate of the new method is 3 times larger for high density polyethylene fuel and 5 times larger for paraffin fuel compared with the conventional method without multi-section swirl injection. The present authors are still conducting combustion experiment intensively and the results will be shown on the Symposium. The results show the new method is quite useful for the increase of the recession rate of paraffin fuel and the increase of the thrust of hybrid rocket engine.

UR - http://www.scopus.com/inward/record.url?scp=79959459941&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=79959459941&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:79959459941

SN - 9781617823688

VL - 3

SP - 2149

EP - 2151

BT - 61st International Astronautical Congress 2010, IAC 2010

ER -