A stable solid-reference electrode of BiCuVOx/perovskite-oxide for potentiometric solid electrolyte CO2 sensor

Shotaro Kishi, Masayoshi Yuasa, Tetsuya Kida, Vilho Eelis Lantto, Kengo Shimanoe, Noboru Yamazoe

研究成果: Contribution to journalArticle査読

10 被引用数 (Scopus)

抄録

A laminated solid-reference electrode of BiCuVOx (Bi 2Cu0.1V0.9O5.35)/Jperovskite-oxide (La0.6Sr0.4Co0.78Ni0.02 Fe 0.2O3) was developed for a NASICON (Na3Zr 2Si2PO12; Na+ conductor)-based potentiometric CO2 sensor. The fabricated electrochemical cell expressed as, CO2, O2/Au (sensing electrode)JLi 2CO3-BaCO3 (auxiliary phase)JNASICON/ BiCuVOx/BiCuVOx-perovskite-oxide (reference electrode) /O2, responded well to changes in CO2 concentration (100-400 ppm) at 450°C under high humid conditions (88%RH). The potential of the developed reference electrode was stable and exhibited little interference by water vapor. Furthermore, the reference electrode potential did not response to CO2 even after the BiCuVOx layer was contaminated with carbonate, indicating a good stability of BiCuVOx against CO 2. The sensor device attached with the laminated solid-reference electrode showed a good warming-up characteristic, i.e., the electromotive force (EMF) of the device reached a steady and constant value when the sensor operation is re-started even after the sensor was exposed to humid air containing CO2 at room temperature.

本文言語英語
ページ(範囲)706-711
ページ数6
ジャーナルJournal of the Ceramic Society of Japan
115
1347
DOI
出版ステータス出版済み - 11 2007

All Science Journal Classification (ASJC) codes

  • Ceramics and Composites
  • Chemistry(all)
  • Condensed Matter Physics
  • Materials Chemistry

フィンガープリント 「A stable solid-reference electrode of BiCuVO<sub>x</sub>/perovskite-oxide for potentiometric solid electrolyte CO<sub>2</sub> sensor」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル