A study on the fabrication of externally connected module by equivalent circuit analysis of optimized dye-sensitized solar cell

Hyunwoong Seo, Mijeong Kim, Min Kyu Son, Kyoung Jun Lee, Jeonghoon Kim, Hee Je Kim

研究成果: Chapter in Book/Report/Conference proceedingConference contribution

抄録

In this study, we attempted an external connection of dye-sensitized solar cells for large scaling, contrary to conventional modules of grid type. Generally, it is well known that series connection is effective but parallel connection cause decrease of efficiency in case of external connection. This is the main reason why researchers avoid external connected module. We proved it by equivalent circuit analysis of dye-sensitized solar cell and made up externally series-parallel connected module as a DC power source. It is difficult to make up practical solar module by only series connection because of extremely low current. Therefore, we make a proper voltage from series connection and a current from parallel connection of dye-sensitized solar cell module without current loss using that analysis. Finally, we made 8V-0.25A large module of series-parallel connected dye-sensitized solar cell based on equivalent circuit analysis.

本文言語英語
ホスト出版物のタイトル33rd IEEE Photovoltaic Specialists Conference, PVSC 2008
DOI
出版ステータス出版済み - 2008
外部発表はい
イベント33rd IEEE Photovoltaic Specialists Conference, PVSC 2008 - San Diego, CA, 米国
継続期間: 5 11 20085 16 2008

出版物シリーズ

名前Conference Record of the IEEE Photovoltaic Specialists Conference
ISSN(印刷版)0160-8371

その他

その他33rd IEEE Photovoltaic Specialists Conference, PVSC 2008
国/地域米国
CitySan Diego, CA
Period5/11/085/16/08

All Science Journal Classification (ASJC) codes

  • 制御およびシステム工学
  • 産業および生産工学
  • 電子工学および電気工学

フィンガープリント

「A study on the fabrication of externally connected module by equivalent circuit analysis of optimized dye-sensitized solar cell」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル