Absorber materials for transition-edge sensor X-ray microcalorimeters

A. D. Brown, S. R. Bandler, R. Brekosky, J. A. Chervenak, E. Figueroa-Feliciano, F. Finkbeiner, N. Iyomoto, R. L. Kelley, C. A. Kilbourne, F. S. Porter, S. Smith, T. Saab, J. Sadleir

研究成果: Contribution to journalArticle査読

20 被引用数 (Scopus)

抄録

Arrays of superconducting transition-edge sensors (TES) can provide high spatial and energy resolution necessary for X-ray astronomy. High quantum efficiency and uniformity of response can be achieved with a suitable absorber material, in which absorber X-ray stopping power, heat capacity, and thermal conductivity are relevant parameters. Here we compare these parameters for bismuth and gold. We have fabricated electroplated gold, electroplated gold/electroplated bismuth, and evaporated gold/evaporated bismuth 8 × 8 absorber arrays and find that a correlation exists between the residual resistance ratio (RRR) and thin film microstructure. This finding indicates that we can tailor absorber material conductivity via microstructure alteration, so as to permit absorber thermalization on timescales suitable for high energy resolution X-ray microcalorimetry. We show that by incorporating absorbers possessing large grain size, including electroplated gold and electroplated gold/electroplated bismuth, into our current Mo/Au TES, devices with tunable heat capacity and energy resolution of 2.4 eV (gold) and 2.1 eV (gold/bismuth) FWHM at 5.9 keV have been fabricated.

本文言語英語
ページ(範囲)413-417
ページ数5
ジャーナルJournal of Low Temperature Physics
151
1-2 PART 1
DOI
出版ステータス出版済み - 4 2008
外部発表はい

All Science Journal Classification (ASJC) codes

  • Atomic and Molecular Physics, and Optics
  • Materials Science(all)
  • Condensed Matter Physics

フィンガープリント 「Absorber materials for transition-edge sensor X-ray microcalorimeters」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル