Achieving enhanced ductility in a dilute magnesium alloy through severe plastic deformation

Kiyoshi Matsubara, Yuichi Miyahara, Zenji Horita, Terence G. Langdon

研究成果: ジャーナルへの寄稿記事

53 引用 (Scopus)

抜粋

Experiments were conducted to evaluate the utility of a new processing procedure developed for Mg-based alloys in which samples are subjected to a two-step processing route of extrusion followed by equal-channel angular pressing (designated as EX-ECAP). The experiments were conducted using a Mg-0.6 wt pct Zr alloy and, for comparison purposes, samples of pure Mg. It is shown that the potential for successfully using ECAP increases in both materials when adopting the EX-ECAP procedure. For the Mg-Zr alloy, the use of EX-ECAP produces a grain size of ∼1.4 μm when the pressing is undertaken at 573 K. By contrast, using EX-ECAP with pure Mg at 573 K produces a grain size of ∼26 μm. Tensile testing of the Mg-Zr alloy at 523 and 573 K after processing by EX-ECAP revealed the occurrence of significantly enhanced ductilities with maximum elongations of ∼300 to 400 pct.

元の言語英語
ページ(範囲)1735-1744
ページ数10
ジャーナルMetallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
35 A
発行部数6
DOI
出版物ステータス出版済み - 1 1 2004

All Science Journal Classification (ASJC) codes

  • Condensed Matter Physics
  • Mechanics of Materials
  • Metals and Alloys

フィンガープリント Achieving enhanced ductility in a dilute magnesium alloy through severe plastic deformation' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用