Active vibration suppression on an image of a scanning electron microscope

Koichi Matsuda, Natsuki Kawamura, Yoichi Kanemitsu, Shinya Kijimoto, Katsuhide Watanabe, Eiichi Izumi

研究成果: Contribution to journalConference article査読

3 被引用数 (Scopus)

抄録

This paper proposes a new approach to reducing an effect of floor vibration on an image of a scanning electron microscope. An image-shifting coil is used to move the electron probe in order to cancel undesirable motion of a specimen due to the floor vibration. The floor vibration is structurally transmitted through the microscope and detected by two acceleration sensors at the root of the specimen chamber of the microscope. The outputs of the acceleration sensors are fed forward into a controller to move the electron probe by the image-shifting coil. The feed-forward controllers are designed in two ways. The first one is based on a transfer function from the sensor outputs to the relative displacement of a specimen to the electron probe being at rest. The microscope is put on a table attached to a shaker. Sinusoidal excitation tests are done many times to estimate the transfer functions from vibrating images of a micro scale. Moreover, the second controller is designed by manually amplifying and delaying the sensor outputs so as to minimize amplitude of the vibrating images on a CRT. Those two controllers are implemented as a digital filter running on a digital signal processor.

本文言語英語
ページ(範囲)622-630
ページ数9
ジャーナルProceedings of SPIE - The International Society for Optical Engineering
3998
出版ステータス出版済み - 1 1 2000
イベントMetrology, Inspection, and Process Control for Microlithography XIV - Santa Clara, CA, USA
継続期間: 2 28 20003 2 2000

All Science Journal Classification (ASJC) codes

  • 電子材料、光学材料、および磁性材料
  • 凝縮系物理学
  • コンピュータ サイエンスの応用
  • 応用数学
  • 電子工学および電気工学

フィンガープリント

「Active vibration suppression on an image of a scanning electron microscope」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル