Acute Swine Model for Assessing Biocompatibility of Biomedical Interface Materials

Tohru Takaseya, Hideyuki Fumoto, Junmin Zhu, Akira Shiose, Mariko Kobayashi, Masako Fujiki, Yoko Arakawa, Raymond Dessoffy, Larry D. Kramer, Kiyotaka Fukamachi

研究成果: Contribution to journalArticle

1 引用 (Scopus)

抜粋

We established an acute animal model for early, straightforward, and reproducible assessment of a biocompatible material interface. Bilateral femoral artery-to-vein shunts were created in 12 pigs: Two tubes per shunt, the left two coated and the right two uncoated. We evaluated two groups: Uncontrolled flow (UF; shunt flow unregulated) and controlled flow (CF; shunt flow ∼50 mL/min). For each case on each side, two shunts were evaluated: One for 1 h and the other for 3 h. Arterial blood gas and complete blood count were recorded at baseline, 1, and 3 h. Mean shunt flows were 532 ± 88 mL/min UF and 52 ± 8 mL/min CF. Differences in flow were much smaller in CF (0.5 mL/min; 1% of mean flow) than UF (24.8 mL/min; 5% of mean flow). In UF, significant changes occurred: In pH, from start of shunting through 1 h; in pO2 and pCO2, from start through 3 h. This swine model using bilateral femoral shunts with controlled blood flow provides a reliable, reproducible, easily implemented method by which to evaluate biocompatibility of device coatings at an early stage of investigation.

元の言語英語
ページ(範囲)69-73
ページ数5
ジャーナルTissue Engineering - Part C: Methods
24
発行部数2
DOI
出版物ステータス出版済み - 2 2018
外部発表Yes

All Science Journal Classification (ASJC) codes

  • Bioengineering
  • Medicine (miscellaneous)
  • Biomedical Engineering

フィンガープリント Acute Swine Model for Assessing Biocompatibility of Biomedical Interface Materials' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用

    Takaseya, T., Fumoto, H., Zhu, J., Shiose, A., Kobayashi, M., Fujiki, M., Arakawa, Y., Dessoffy, R., Kramer, L. D., & Fukamachi, K. (2018). Acute Swine Model for Assessing Biocompatibility of Biomedical Interface Materials. Tissue Engineering - Part C: Methods, 24(2), 69-73. https://doi.org/10.1089/ten.tec.2017.0310