Adhesion force measurement of live cypris tentacles by scanning probe microscopy in seawater

Shohei Shiomoto, Yuka Yamaguchi, Kazuo Yamaguchi, Yasuyuki Nogata, Motoyasu Kobayashi

研究成果: ジャーナルへの寄稿学術誌査読

5 被引用数 (Scopus)


The adhesion force of the tentacle of a live cypris on a glass surface covered with polymer brush was directly measured by scanning probe microscopy. Polymer brushes were prepared on the cover glass and silicon wafers by surface-initiated atom transfer radical polymerization of 3-(N-2-methacryloyloxyethyl-N,N-dimethyl)ammonatopropanesulfonate (MAPS) or 2-hydroxyethyl methacrylate (HEMA). A small amount of glue was placed at the edge of a tipless cantilever supported by the piezo motion control system of the scanning probe microscope and monitored by using an optical microscope. A live cypris swimming in seawater was held down on the slide glass by the cantilever for 30 min until the glue cured. The tentacles of the live cypris immobilized on the cantilever were forced to make contact with the surface-modified cover glass. The adhesion force was determined by the torsion of the cantilever when the tentacle was detached from the cover glass surface. The adhesion force between the cypris and the propylsilane-modified glass surface increased from 1.6 to 40 μN with the increase in age of the cypris larva from 3 to 21 days after metamorphosis from the nauplius larva. Poly(MAPS) and poly(HEMA) brush surfaces exhibited extremely low adhesion to the cypris larva during 21 days in seawater, indicating the effective antifouling property of hydrophilic polymer brushes.

ジャーナルPolymer Journal
出版ステータス出版済み - 1月 1 2019

!!!All Science Journal Classification (ASJC) codes

  • ポリマーおよびプラスチック
  • 材料化学


「Adhesion force measurement of live cypris tentacles by scanning probe microscopy in seawater」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。