Adsorption of Difluoromethane (HFC-32) onto phenol resin based adsorbent

Theory and experiments

Muhammad Sultan, Takahiko Miyazaki, Bidyut Baran Saha, Shigeru Koyama, Hyun Sig Kil, Koji Nakabayashi, Jin Miyawaki, Seong-Ho Yoon

研究成果: ジャーナルへの寄稿記事

抄録

Adsorption and desorption of difluoromethane (HFC-32) onto newly developed phenol resin based adsorbent (SAC-2) have been measured experimentally for the isotherm temperatures ranging from 30 °C to 130 °C and pressure up to 3 MPa. A magnetic suspension balance based adsorption measurement unit is used to measure adsorption uptake gravimetrically. The presented SAC-2/HFC-32 pair has adsorption uptake as high as 2.23 kg ref /kg ads (excess adsorption) and 2.34 kg ref /kg ads (absolute adsorption) at 30 °C and 1.67 MPa. To the best of our knowledge, it is the highest HFC-32 adsorption capacity onto any adsorbent available in the literature. The experimental data of adsorption/desorption isotherms show that there is no hysteresis for the studied pair. The data have been fitted with Tóth; Dubinin–Astakhov (D–A); and Guggenheim, Anderson, De-Boer (GAB) adsorption isotherm models. The parameters of adsorption isotherm models are optimized by nonlinear optimization technique. The D–A model fits the experimental data precisely as compared to other models. In addition, numerical values of isosteric heat of adsorption have also been extracted by means of Clausius–Clapeyron equation using adsorption isotherm models.

元の言語英語
ページ(範囲)348-356
ページ数9
ジャーナルInternational Journal of Heat and Mass Transfer
127
DOI
出版物ステータス出版済み - 12 1 2018

Fingerprint

Phenol
adsorbents
phenols
Adsorbents
resins
Phenols
Resins
Adsorption
adsorption
Experiments
isotherms
Adsorption isotherms
Isotherms
Desorption
difluoromethane
Units of measurement
desorption
magnetic suspension
Hysteresis
Suspensions

All Science Journal Classification (ASJC) codes

  • Condensed Matter Physics
  • Mechanical Engineering
  • Fluid Flow and Transfer Processes

これを引用

@article{beea79eb29d04f9a86eb2aa4d9127f10,
title = "Adsorption of Difluoromethane (HFC-32) onto phenol resin based adsorbent: Theory and experiments",
abstract = "Adsorption and desorption of difluoromethane (HFC-32) onto newly developed phenol resin based adsorbent (SAC-2) have been measured experimentally for the isotherm temperatures ranging from 30 °C to 130 °C and pressure up to 3 MPa. A magnetic suspension balance based adsorption measurement unit is used to measure adsorption uptake gravimetrically. The presented SAC-2/HFC-32 pair has adsorption uptake as high as 2.23 kg ref /kg ads (excess adsorption) and 2.34 kg ref /kg ads (absolute adsorption) at 30 °C and 1.67 MPa. To the best of our knowledge, it is the highest HFC-32 adsorption capacity onto any adsorbent available in the literature. The experimental data of adsorption/desorption isotherms show that there is no hysteresis for the studied pair. The data have been fitted with T{\'o}th; Dubinin–Astakhov (D–A); and Guggenheim, Anderson, De-Boer (GAB) adsorption isotherm models. The parameters of adsorption isotherm models are optimized by nonlinear optimization technique. The D–A model fits the experimental data precisely as compared to other models. In addition, numerical values of isosteric heat of adsorption have also been extracted by means of Clausius–Clapeyron equation using adsorption isotherm models.",
author = "Muhammad Sultan and Takahiko Miyazaki and Saha, {Bidyut Baran} and Shigeru Koyama and Kil, {Hyun Sig} and Koji Nakabayashi and Jin Miyawaki and Seong-Ho Yoon",
year = "2018",
month = "12",
day = "1",
doi = "10.1016/j.ijheatmasstransfer.2018.07.097",
language = "English",
volume = "127",
pages = "348--356",
journal = "International Journal of Heat and Mass Transfer",
issn = "0017-9310",
publisher = "Elsevier Limited",

}

TY - JOUR

T1 - Adsorption of Difluoromethane (HFC-32) onto phenol resin based adsorbent

T2 - Theory and experiments

AU - Sultan, Muhammad

AU - Miyazaki, Takahiko

AU - Saha, Bidyut Baran

AU - Koyama, Shigeru

AU - Kil, Hyun Sig

AU - Nakabayashi, Koji

AU - Miyawaki, Jin

AU - Yoon, Seong-Ho

PY - 2018/12/1

Y1 - 2018/12/1

N2 - Adsorption and desorption of difluoromethane (HFC-32) onto newly developed phenol resin based adsorbent (SAC-2) have been measured experimentally for the isotherm temperatures ranging from 30 °C to 130 °C and pressure up to 3 MPa. A magnetic suspension balance based adsorption measurement unit is used to measure adsorption uptake gravimetrically. The presented SAC-2/HFC-32 pair has adsorption uptake as high as 2.23 kg ref /kg ads (excess adsorption) and 2.34 kg ref /kg ads (absolute adsorption) at 30 °C and 1.67 MPa. To the best of our knowledge, it is the highest HFC-32 adsorption capacity onto any adsorbent available in the literature. The experimental data of adsorption/desorption isotherms show that there is no hysteresis for the studied pair. The data have been fitted with Tóth; Dubinin–Astakhov (D–A); and Guggenheim, Anderson, De-Boer (GAB) adsorption isotherm models. The parameters of adsorption isotherm models are optimized by nonlinear optimization technique. The D–A model fits the experimental data precisely as compared to other models. In addition, numerical values of isosteric heat of adsorption have also been extracted by means of Clausius–Clapeyron equation using adsorption isotherm models.

AB - Adsorption and desorption of difluoromethane (HFC-32) onto newly developed phenol resin based adsorbent (SAC-2) have been measured experimentally for the isotherm temperatures ranging from 30 °C to 130 °C and pressure up to 3 MPa. A magnetic suspension balance based adsorption measurement unit is used to measure adsorption uptake gravimetrically. The presented SAC-2/HFC-32 pair has adsorption uptake as high as 2.23 kg ref /kg ads (excess adsorption) and 2.34 kg ref /kg ads (absolute adsorption) at 30 °C and 1.67 MPa. To the best of our knowledge, it is the highest HFC-32 adsorption capacity onto any adsorbent available in the literature. The experimental data of adsorption/desorption isotherms show that there is no hysteresis for the studied pair. The data have been fitted with Tóth; Dubinin–Astakhov (D–A); and Guggenheim, Anderson, De-Boer (GAB) adsorption isotherm models. The parameters of adsorption isotherm models are optimized by nonlinear optimization technique. The D–A model fits the experimental data precisely as compared to other models. In addition, numerical values of isosteric heat of adsorption have also been extracted by means of Clausius–Clapeyron equation using adsorption isotherm models.

UR - http://www.scopus.com/inward/record.url?scp=85050556270&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85050556270&partnerID=8YFLogxK

U2 - 10.1016/j.ijheatmasstransfer.2018.07.097

DO - 10.1016/j.ijheatmasstransfer.2018.07.097

M3 - Article

VL - 127

SP - 348

EP - 356

JO - International Journal of Heat and Mass Transfer

JF - International Journal of Heat and Mass Transfer

SN - 0017-9310

ER -