Adsorptive properties in toluene removal over hierarchical zeolites

Shushu Huang, Wei Deng, Long Zhang, Dengyao Yang, Qiang Gao, Zhengfang Tian, Limin Guo, Tatsumi Ishihara

研究成果: ジャーナルへの寄稿記事

1 引用 (Scopus)

抜粋

Three kinds of hierarchical Mordenite Framework Inverted (MFI)-type nanozeolites including Si-MFI, Al-MFI and Ti-MFI were successfully synthesized by two-stage varying temperature hydrothermal treatment. Taking toluene as the probe molecule, a series of methods were used to evaluate the adsorption properties of as-synthesized hierarchical zeolites samples including the adsorption breakthrough curves, simulation of adsorption isotherms as well as kinetics models and toluene-TPD (the temperature programmed desorption of toluene). The dynamic adsorption results showed that Al-MFI exhibited the highest adsorption capacity for toluene (58 mg/gads) under dry gas condition while Ti-MFI had the optimal toluene adsorption performance (45 mg/gads) under the wet gas condition (the relative humidity was 50%). The simulation results indicated that the adsorption behavior of toluene on hierarchical MFI nanozeolites conformed to the Freundlich principle, and the pseudo-first-order adsorption model was suitable to elucidate the adsorption process. Moreover, the fitting result of intraparticle diffusion model indicated that the adsorption process was affected by multiple adsorption steps and the intraparticle diffusion was not the control step.

元の言語英語
記事番号110204
ジャーナルMicroporous and Mesoporous Materials
302
DOI
出版物ステータス出版済み - 8 1 2020

All Science Journal Classification (ASJC) codes

  • Chemistry(all)
  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials

フィンガープリント Adsorptive properties in toluene removal over hierarchical zeolites' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用