Aerodynamic analysis of clustered, diffuser-augmented turbines

Uli Goeltenbott, Yuji Ohya, Takashi Karasudani, Shigeo Yoshida, Peter Jamieson

研究成果: 会議への寄与タイプ論文

抄録

The wind turbine industry has seen innovations leading to growing size of turbines of currently over 160 m in diameter. However, as pointed out by some recent studies, up-scaling of blades has its limitations and therefore advantages of multi-rotor system concepts have been suggested by Jamieson et al. The so-called wind lens turbine, which was developed by Kyushu University, shows increased power output using a brimmed diffuser to augment the approaching wind flow. In the presented research we are investigating the aerodynamics of wind lens turbines spaced closely together comprising a multi-rotor system. We placed up to three of these turbines closely in an array perpendicular to the flow and measured power output. The total power output of multiple turbines was then compared to the power of the stand-alone setup. Several different wind lens configurations have been used, mainly varying the brim height. We observed that the performance of the turbines is influenced by the width of the gap between the brims and the brim height of the wind lens configuration. The best performance was at a gap of 0.15 D with 10% brim height which leads to a power increase of more than 9 % in a three turbine side-by-side arrangement. Further it was observed that the individual power output doesn't follow the trend of the cumulative power output. These phenomena can be explained with flow patterns observed in gap flow analysis of bluff bodies. Further research is necessary to fully understand which mechanisms in three dimensional gap flow cause the effect on the performance of the turbines.

元の言語英語
出版物ステータス出版済み - 1 1 2015
イベントInternational Conference on Power Engineering, ICOPE 2015 - Yokohama, 日本
継続期間: 11 30 201512 4 2015

その他

その他International Conference on Power Engineering, ICOPE 2015
日本
Yokohama
期間11/30/1512/4/15

Fingerprint

Aerodynamics
Turbines
Lenses
Rotors
Flow patterns
Wind turbines
Innovation
Industry

All Science Journal Classification (ASJC) codes

  • Energy Engineering and Power Technology

これを引用

Goeltenbott, U., Ohya, Y., Karasudani, T., Yoshida, S., & Jamieson, P. (2015). Aerodynamic analysis of clustered, diffuser-augmented turbines. 論文発表場所 International Conference on Power Engineering, ICOPE 2015, Yokohama, 日本.

Aerodynamic analysis of clustered, diffuser-augmented turbines. / Goeltenbott, Uli; Ohya, Yuji; Karasudani, Takashi; Yoshida, Shigeo; Jamieson, Peter.

2015. 論文発表場所 International Conference on Power Engineering, ICOPE 2015, Yokohama, 日本.

研究成果: 会議への寄与タイプ論文

Goeltenbott, U, Ohya, Y, Karasudani, T, Yoshida, S & Jamieson, P 2015, 'Aerodynamic analysis of clustered, diffuser-augmented turbines' 論文発表場所 International Conference on Power Engineering, ICOPE 2015, Yokohama, 日本, 11/30/15 - 12/4/15, .
Goeltenbott U, Ohya Y, Karasudani T, Yoshida S, Jamieson P. Aerodynamic analysis of clustered, diffuser-augmented turbines. 2015. 論文発表場所 International Conference on Power Engineering, ICOPE 2015, Yokohama, 日本.
Goeltenbott, Uli ; Ohya, Yuji ; Karasudani, Takashi ; Yoshida, Shigeo ; Jamieson, Peter. / Aerodynamic analysis of clustered, diffuser-augmented turbines. 論文発表場所 International Conference on Power Engineering, ICOPE 2015, Yokohama, 日本.
@conference{10fa4a01b19a42c6a15359e4b08320f9,
title = "Aerodynamic analysis of clustered, diffuser-augmented turbines",
abstract = "The wind turbine industry has seen innovations leading to growing size of turbines of currently over 160 m in diameter. However, as pointed out by some recent studies, up-scaling of blades has its limitations and therefore advantages of multi-rotor system concepts have been suggested by Jamieson et al. The so-called wind lens turbine, which was developed by Kyushu University, shows increased power output using a brimmed diffuser to augment the approaching wind flow. In the presented research we are investigating the aerodynamics of wind lens turbines spaced closely together comprising a multi-rotor system. We placed up to three of these turbines closely in an array perpendicular to the flow and measured power output. The total power output of multiple turbines was then compared to the power of the stand-alone setup. Several different wind lens configurations have been used, mainly varying the brim height. We observed that the performance of the turbines is influenced by the width of the gap between the brims and the brim height of the wind lens configuration. The best performance was at a gap of 0.15 D with 10{\%} brim height which leads to a power increase of more than 9 {\%} in a three turbine side-by-side arrangement. Further it was observed that the individual power output doesn't follow the trend of the cumulative power output. These phenomena can be explained with flow patterns observed in gap flow analysis of bluff bodies. Further research is necessary to fully understand which mechanisms in three dimensional gap flow cause the effect on the performance of the turbines.",
author = "Uli Goeltenbott and Yuji Ohya and Takashi Karasudani and Shigeo Yoshida and Peter Jamieson",
year = "2015",
month = "1",
day = "1",
language = "English",
note = "International Conference on Power Engineering, ICOPE 2015 ; Conference date: 30-11-2015 Through 04-12-2015",

}

TY - CONF

T1 - Aerodynamic analysis of clustered, diffuser-augmented turbines

AU - Goeltenbott, Uli

AU - Ohya, Yuji

AU - Karasudani, Takashi

AU - Yoshida, Shigeo

AU - Jamieson, Peter

PY - 2015/1/1

Y1 - 2015/1/1

N2 - The wind turbine industry has seen innovations leading to growing size of turbines of currently over 160 m in diameter. However, as pointed out by some recent studies, up-scaling of blades has its limitations and therefore advantages of multi-rotor system concepts have been suggested by Jamieson et al. The so-called wind lens turbine, which was developed by Kyushu University, shows increased power output using a brimmed diffuser to augment the approaching wind flow. In the presented research we are investigating the aerodynamics of wind lens turbines spaced closely together comprising a multi-rotor system. We placed up to three of these turbines closely in an array perpendicular to the flow and measured power output. The total power output of multiple turbines was then compared to the power of the stand-alone setup. Several different wind lens configurations have been used, mainly varying the brim height. We observed that the performance of the turbines is influenced by the width of the gap between the brims and the brim height of the wind lens configuration. The best performance was at a gap of 0.15 D with 10% brim height which leads to a power increase of more than 9 % in a three turbine side-by-side arrangement. Further it was observed that the individual power output doesn't follow the trend of the cumulative power output. These phenomena can be explained with flow patterns observed in gap flow analysis of bluff bodies. Further research is necessary to fully understand which mechanisms in three dimensional gap flow cause the effect on the performance of the turbines.

AB - The wind turbine industry has seen innovations leading to growing size of turbines of currently over 160 m in diameter. However, as pointed out by some recent studies, up-scaling of blades has its limitations and therefore advantages of multi-rotor system concepts have been suggested by Jamieson et al. The so-called wind lens turbine, which was developed by Kyushu University, shows increased power output using a brimmed diffuser to augment the approaching wind flow. In the presented research we are investigating the aerodynamics of wind lens turbines spaced closely together comprising a multi-rotor system. We placed up to three of these turbines closely in an array perpendicular to the flow and measured power output. The total power output of multiple turbines was then compared to the power of the stand-alone setup. Several different wind lens configurations have been used, mainly varying the brim height. We observed that the performance of the turbines is influenced by the width of the gap between the brims and the brim height of the wind lens configuration. The best performance was at a gap of 0.15 D with 10% brim height which leads to a power increase of more than 9 % in a three turbine side-by-side arrangement. Further it was observed that the individual power output doesn't follow the trend of the cumulative power output. These phenomena can be explained with flow patterns observed in gap flow analysis of bluff bodies. Further research is necessary to fully understand which mechanisms in three dimensional gap flow cause the effect on the performance of the turbines.

UR - http://www.scopus.com/inward/record.url?scp=84962655536&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84962655536&partnerID=8YFLogxK

M3 - Paper

AN - SCOPUS:84962655536

ER -