Aging Behavior of Al 6061 Alloy Processed by High-Pressure Torsion and Subsequent Aging

Intan Fadhlina Mohamed, Seungwon Lee, Kaveh Edalati, Zenji Horita, Shoichi Hirosawa, Kenji Matsuda, Daisuke Terada

    研究成果: Contribution to journalArticle査読

    21 被引用数 (Scopus)

    抄録

    A process to achieve strengthening in an Al 6061 alloy by grain refinement to ~200 nm using high-pressure torsion (HPT) and fine precipitation using aging treatment is studied. It is shown that although aging of the HPT-processed sample is effective for extra strengthening of the alloy, the imposed shear strain and the aging temperature should be selected carefully. The HPT processing after 5 turns leads high saturation hardness and tensile strength of 163 Hv and 470 MPa, respectively. The hardness at the saturation level remains the same during aging at 373 K (100 °C), while the hardness decreases by aging at 423 K (150 °C). When the disks are processed for 0.75 turns (lower shear strains) and aged at 373 K (100 °C), the hardness increases above the hardness level at the saturation because of the formation of B′ and β′ precipitates. Quantitative analyses indicate that three major hardening mechanisms contribute to the total hardening: grain boundary hardening through the Hall–Petch relationship, dislocation hardening through the Bailey–Hirsch relationship and precipitation hardening through the Orowan relationship. This study shows that the contribution of different strengthening mechanisms can be estimated using a linear additive relationship in ultrafine-grained aluminum alloys.

    本文言語英語
    ページ(範囲)2664-2673
    ページ数10
    ジャーナルMetallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
    46
    6
    DOI
    出版ステータス出版済み - 6 1 2015

    All Science Journal Classification (ASJC) codes

    • 凝縮系物理学
    • 材料力学
    • 金属および合金

    フィンガープリント

    「Aging Behavior of Al 6061 Alloy Processed by High-Pressure Torsion and Subsequent Aging」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

    引用スタイル