An array of interdigitated parallel wire electrodes for preparing a large-scale nanocomposite film with aligned carbon nanotubes

W. Sun, H. Tomita, S. Hasegawa, Y. Kitamura, M. Nakano, J. Suehiro

研究成果: Contribution to journalArticle査読

19 被引用数 (Scopus)

抄録

Application of high electric field is effective for the alignment of carbon nanotube (CNT) in a nanocomposite film. The conventionally used single pair of parallel plate electrodes is not applicable to large-sized nanocomposite fabrication due to limited output voltage of the high-voltage source. We have proposed an array of parallel wire electrodes to address this issue. The composite material was spread over a thin dielectric layer placed on the wire electrodes. The high electric field region can be extended over a wider area just by increasing the number of electrode pairs. Discrete electric field distribution bordered by the wire electrodes was avoided by linearly oscillated motion of the composite film. A CNT/epoxy resin composite film with a size of 15 cm × 15 cm was successfully fabricated.

本文言語英語
論文番号445303
ジャーナルJournal of Physics D: Applied Physics
44
44
DOI
出版ステータス出版済み - 11 9 2011

All Science Journal Classification (ASJC) codes

  • 電子材料、光学材料、および磁性材料
  • 凝縮系物理学
  • 音響学および超音波学
  • 表面、皮膜および薄膜

フィンガープリント

「An array of interdigitated parallel wire electrodes for preparing a large-scale nanocomposite film with aligned carbon nanotubes」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル