An aspect of bitumen emulsification by steam condensation: Effect of formation temperature and bitumen content

O. S. Alade, K. Sasaki, Y. Sugai, B. Ademodi, J. Kumasaka, M. Nakano

研究成果: ジャーナルへの寄稿記事

2 引用 (Scopus)

抄録

ABSTRACT: The experiments to form emulsions of bitumen including fine droplets of condensate water were carried out for an average formation temperature range; Tf = 38–69°C and bitumen content; CB = 29–82%. It was observed that the water retention capacity or stability of the emulsions after mild agitation was significantly affected by formation temperature and content of the bitumen. The particle size of water droplets in emulsion decreased with increasing formation temperature. However, bitumen emulsions showed similar shear thinning non-Newtonian behavior in spite of the formation temperature, since water droplets in the emulsions changed under shear flow to smaller size similar to ones formed at the higher formation temperature.

元の言語英語
ページ(範囲)1790-1797
ページ数8
ジャーナルEnergy Sources, Part A: Recovery, Utilization and Environmental Effects
38
発行部数12
DOI
出版物ステータス出版済み - 6 17 2016

Fingerprint

Emulsification
Emulsions
Condensation
Steam
Water
Temperature
Shear thinning
Shear flow
Particle size
Experiments

All Science Journal Classification (ASJC) codes

  • Fuel Technology

これを引用

An aspect of bitumen emulsification by steam condensation : Effect of formation temperature and bitumen content. / Alade, O. S.; Sasaki, K.; Sugai, Y.; Ademodi, B.; Kumasaka, J.; Nakano, M.

:: Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 巻 38, 番号 12, 17.06.2016, p. 1790-1797.

研究成果: ジャーナルへの寄稿記事

@article{733c59ec63fe43d6b8d55bbb74b33dd0,
title = "An aspect of bitumen emulsification by steam condensation: Effect of formation temperature and bitumen content",
abstract = "ABSTRACT: The experiments to form emulsions of bitumen including fine droplets of condensate water were carried out for an average formation temperature range; Tf = 38–69°C and bitumen content; CB = 29–82{\%}. It was observed that the water retention capacity or stability of the emulsions after mild agitation was significantly affected by formation temperature and content of the bitumen. The particle size of water droplets in emulsion decreased with increasing formation temperature. However, bitumen emulsions showed similar shear thinning non-Newtonian behavior in spite of the formation temperature, since water droplets in the emulsions changed under shear flow to smaller size similar to ones formed at the higher formation temperature.",
author = "Alade, {O. S.} and K. Sasaki and Y. Sugai and B. Ademodi and J. Kumasaka and M. Nakano",
year = "2016",
month = "6",
day = "17",
doi = "10.1080/15567036.2014.981321",
language = "English",
volume = "38",
pages = "1790--1797",
journal = "Energy Sources, Part A: Recovery, Utilization and Environmental Effects",
issn = "1556-7036",
publisher = "Taylor and Francis Ltd.",
number = "12",

}

TY - JOUR

T1 - An aspect of bitumen emulsification by steam condensation

T2 - Effect of formation temperature and bitumen content

AU - Alade, O. S.

AU - Sasaki, K.

AU - Sugai, Y.

AU - Ademodi, B.

AU - Kumasaka, J.

AU - Nakano, M.

PY - 2016/6/17

Y1 - 2016/6/17

N2 - ABSTRACT: The experiments to form emulsions of bitumen including fine droplets of condensate water were carried out for an average formation temperature range; Tf = 38–69°C and bitumen content; CB = 29–82%. It was observed that the water retention capacity or stability of the emulsions after mild agitation was significantly affected by formation temperature and content of the bitumen. The particle size of water droplets in emulsion decreased with increasing formation temperature. However, bitumen emulsions showed similar shear thinning non-Newtonian behavior in spite of the formation temperature, since water droplets in the emulsions changed under shear flow to smaller size similar to ones formed at the higher formation temperature.

AB - ABSTRACT: The experiments to form emulsions of bitumen including fine droplets of condensate water were carried out for an average formation temperature range; Tf = 38–69°C and bitumen content; CB = 29–82%. It was observed that the water retention capacity or stability of the emulsions after mild agitation was significantly affected by formation temperature and content of the bitumen. The particle size of water droplets in emulsion decreased with increasing formation temperature. However, bitumen emulsions showed similar shear thinning non-Newtonian behavior in spite of the formation temperature, since water droplets in the emulsions changed under shear flow to smaller size similar to ones formed at the higher formation temperature.

UR - http://www.scopus.com/inward/record.url?scp=84976271657&partnerID=8YFLogxK

UR - http://www.tandfonline.com/doi/abs/10.1080/15567036.2014.981321

U2 - 10.1080/15567036.2014.981321

DO - 10.1080/15567036.2014.981321

M3 - Article

AN - SCOPUS:84976271657

VL - 38

SP - 1790

EP - 1797

JO - Energy Sources, Part A: Recovery, Utilization and Environmental Effects

JF - Energy Sources, Part A: Recovery, Utilization and Environmental Effects

SN - 1556-7036

IS - 12

ER -