An dynamic control mechanism of interrupt stack overflow on real-time embedded monitor REMON

Shigeki Nankaku, Hiroyuki Kawakami, Hisao Koizumi, Akira Fukuda

研究成果: ジャーナルへの寄稿学術誌査読

抄録

For embedded systems, it is important to capture changes in real world and process properly. The changes are represented by external interrupts, and proper processes are implemented by nested interrupt service routines (hereafter ISRs). Here a necessity of mutual exclusion arises. In a software execution environment without any Real Time OS (hereafter RTOS), a traditional mutual exclusion approach was to disable/enable interrupts in a CPU specific manner. However this method typically degrades the real time performance because it defers execution of mutual-exclusion-free part of the system. Considering this situation, we have been studying a Real-Time Embedded Monitor (REMON) which provides a novel mutual exclusion method that can maintain real-time performance without RTOS. For in-service embedded systems, one major runtime fault is ISR stack overflow. It is extremely difficult to test every conditions where ISRs are called from various external conditions. Note that ISR stack holds not only data but also program instruction addresses, consequently a stack overflow may cause a fatal system error. In summary, ISR stack overflow is a significant issue, but it was not addressed by REMON until now. This paper proposes two safety extension methods for embedded systems using REMON. The first method detects ISR overflow and safely stops the system before triggering a system-down or a misbehavior. The second method reallocates ISR stack and resumes the system execution automatically.

本文言語英語
ページ(範囲)1509-1520+13
ジャーナルIEEJ Transactions on Electronics, Information and Systems
133
8
DOI
出版ステータス出版済み - 2013

!!!All Science Journal Classification (ASJC) codes

  • 電子工学および電気工学

フィンガープリント

「An dynamic control mechanism of interrupt stack overflow on real-time embedded monitor REMON」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル