An effect of surface treatment on adhesion behavior of poly (butylene terephthalate)

Yasushi Okamoto, Kazuo Kato, Takashi Aoki, Takao Izumi, Keiji Tanaka, Osami Sakata, Sono Sasaki, Atsushi Takahara, Tisato Kajiyanm

研究成果: 会議への寄与タイプ学会誌査読

抄録

An effect of surface treatment on adhesion behavior of poly (butylene terephthalate) (PBT) with epoxy adhesive was studied. In general, PBT is supposed to be annealed at a temperature above the glass transition temperature to obtain dimensional stability for the practical use. However, such an annealing procedure makes the adhesion properties poorer. In this study, we demonstrate that tensile adhesive strength for annealed PBT could be improved through UV irradiation or chemical etching treatment. Tensile adhesive strength increased with increasing surface density of C-O and C=O groups, which were quantitatively detected by XPS. Finally, it was concluded that chemical interaction between carboxyl and/or ester groups of PBT and hydroxyl groups of epoxy adhesive was a responsible factor in improving adhesive strength between PBT and epoxy adhesive.

本文言語英語
ページ3289-3290
ページ数2
出版ステータス出版済み - 2005
イベント54th SPSJ Symposium on Macromolecules - Yamagata, 日本
継続期間: 9月 20 20059月 22 2005

その他

その他54th SPSJ Symposium on Macromolecules
国/地域日本
CityYamagata
Period9/20/059/22/05

!!!All Science Journal Classification (ASJC) codes

  • 工学(全般)

フィンガープリント

「An effect of surface treatment on adhesion behavior of poly (butylene terephthalate)」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル