An investigation of LES and Hybrid LES/RANS models for predicting 3-D diffuser flow

Ken ichi Abe, Tadashi Ohtsuka

研究成果: Contribution to journalArticle査読

16 被引用数 (Scopus)

抄録

In order to derive a possible path for developing a large eddy simulation (LES) applicable to high Reynolds-number complex turbulent flows, performance of an LES and a hybrid approach connecting LES with Reynolds-Averaged Navier-Stokes (RANS) modeling in the near-wall region (hybrid LES/RANS model, HLR model) was investigated. To discuss the model performance in detail, representative LES and HLR models were applied to a three-dimensional diffuser flow with massive separation. The HLR model gave considerable improvement of the prediction accuracy even with moderate grid resolution, while the LES returned earlier separation just downstream of the diffuser-inlet section. Furthermore, by processing the simulation data, useful knowledge was obtained for further development of this kind of turbulence model. In particular, it was elucidated that the non-linear eddy-viscosity model adopted in the HLR model was effective to reproduce the near-wall turbulence more correctly. This fact resulted in the suppression of an undesirable early separation.

本文言語英語
ページ(範囲)833-844
ページ数12
ジャーナルInternational Journal of Heat and Fluid Flow
31
5
DOI
出版ステータス出版済み - 10 1 2010

All Science Journal Classification (ASJC) codes

  • 凝縮系物理学
  • 機械工学
  • 流体および伝熱

フィンガープリント

「An investigation of LES and Hybrid LES/RANS models for predicting 3-D diffuser flow」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル