Analysis of heat and mass transfer characteristics of desiccant dehumidifier system with honeycomb configuration

Indri Yaningsih, Agung Tri Wijayanta, Takahiko Miyazaki, Shigeru Koyama

研究成果: ジャーナルへの寄稿記事

1 引用 (Scopus)

抄録

Adjusting the heat and moisture of a conditioned space is important to maintain the comfort of the air. Adding or removing heat and moisture depends mainly on the heat and mass transfer characteristics within the system. In this study, the heat and mass transfer characteristics, in the form of the Nusselt number (Nu) and the Sherwood number (Sh), of a honeycomb desiccant dehumidifier (HDDH) were investigated experimentally. The HDDH was driven by using the honeycomb desiccant configuration, which was constructed from a polymer adsorbent material. The adsorption temperature (T ads ) was considered as an adjustable parameter using values of 20 °C, 25 °C, and 35 °C. Each adsorption temperature was evaluated under the time intervals for the desorption and adsorption processes (switching time: τ) of 60:60 min, 60:90 min, 60:120 min, and 90:120 min. For the given parameters, the desorption temperature and mass flow rate of the air were kept unchanged at 55 °C and 0.1 kg/s, respectively. The results showed that the Nu and Sh are more evenly responsive to change of adsorption temperature than switching time. Low desorption temperature results in high values of Nu and Sh. However, variation of switching time produces little change in Nu and Sh. Empirical correlations were also developed in this study. The empirical correlations matched the experimental data well.

元の言語英語
ページ(範囲)658-669
ページ数12
ジャーナルApplied Thermal Engineering
144
DOI
出版物ステータス出版済み - 11 5 2018

Fingerprint

Mass transfer
Heat transfer
Adsorption
Desorption
Moisture
Temperature
Nusselt number
Air
Adsorbents
Flow rate
Polymers
Hot Temperature

All Science Journal Classification (ASJC) codes

  • Energy Engineering and Power Technology
  • Industrial and Manufacturing Engineering

これを引用

Analysis of heat and mass transfer characteristics of desiccant dehumidifier system with honeycomb configuration. / Yaningsih, Indri; Wijayanta, Agung Tri; Miyazaki, Takahiko; Koyama, Shigeru.

:: Applied Thermal Engineering, 巻 144, 05.11.2018, p. 658-669.

研究成果: ジャーナルへの寄稿記事

@article{867cc2d0e72c470fb6d6db32c5c969dd,
title = "Analysis of heat and mass transfer characteristics of desiccant dehumidifier system with honeycomb configuration",
abstract = "Adjusting the heat and moisture of a conditioned space is important to maintain the comfort of the air. Adding or removing heat and moisture depends mainly on the heat and mass transfer characteristics within the system. In this study, the heat and mass transfer characteristics, in the form of the Nusselt number (Nu) and the Sherwood number (Sh), of a honeycomb desiccant dehumidifier (HDDH) were investigated experimentally. The HDDH was driven by using the honeycomb desiccant configuration, which was constructed from a polymer adsorbent material. The adsorption temperature (T ads ) was considered as an adjustable parameter using values of 20 °C, 25 °C, and 35 °C. Each adsorption temperature was evaluated under the time intervals for the desorption and adsorption processes (switching time: τ) of 60:60 min, 60:90 min, 60:120 min, and 90:120 min. For the given parameters, the desorption temperature and mass flow rate of the air were kept unchanged at 55 °C and 0.1 kg/s, respectively. The results showed that the Nu and Sh are more evenly responsive to change of adsorption temperature than switching time. Low desorption temperature results in high values of Nu and Sh. However, variation of switching time produces little change in Nu and Sh. Empirical correlations were also developed in this study. The empirical correlations matched the experimental data well.",
author = "Indri Yaningsih and Wijayanta, {Agung Tri} and Takahiko Miyazaki and Shigeru Koyama",
year = "2018",
month = "11",
day = "5",
doi = "10.1016/j.applthermaleng.2018.08.066",
language = "English",
volume = "144",
pages = "658--669",
journal = "Applied Thermal Engineering",
issn = "1359-4311",
publisher = "Elsevier Limited",

}

TY - JOUR

T1 - Analysis of heat and mass transfer characteristics of desiccant dehumidifier system with honeycomb configuration

AU - Yaningsih, Indri

AU - Wijayanta, Agung Tri

AU - Miyazaki, Takahiko

AU - Koyama, Shigeru

PY - 2018/11/5

Y1 - 2018/11/5

N2 - Adjusting the heat and moisture of a conditioned space is important to maintain the comfort of the air. Adding or removing heat and moisture depends mainly on the heat and mass transfer characteristics within the system. In this study, the heat and mass transfer characteristics, in the form of the Nusselt number (Nu) and the Sherwood number (Sh), of a honeycomb desiccant dehumidifier (HDDH) were investigated experimentally. The HDDH was driven by using the honeycomb desiccant configuration, which was constructed from a polymer adsorbent material. The adsorption temperature (T ads ) was considered as an adjustable parameter using values of 20 °C, 25 °C, and 35 °C. Each adsorption temperature was evaluated under the time intervals for the desorption and adsorption processes (switching time: τ) of 60:60 min, 60:90 min, 60:120 min, and 90:120 min. For the given parameters, the desorption temperature and mass flow rate of the air were kept unchanged at 55 °C and 0.1 kg/s, respectively. The results showed that the Nu and Sh are more evenly responsive to change of adsorption temperature than switching time. Low desorption temperature results in high values of Nu and Sh. However, variation of switching time produces little change in Nu and Sh. Empirical correlations were also developed in this study. The empirical correlations matched the experimental data well.

AB - Adjusting the heat and moisture of a conditioned space is important to maintain the comfort of the air. Adding or removing heat and moisture depends mainly on the heat and mass transfer characteristics within the system. In this study, the heat and mass transfer characteristics, in the form of the Nusselt number (Nu) and the Sherwood number (Sh), of a honeycomb desiccant dehumidifier (HDDH) were investigated experimentally. The HDDH was driven by using the honeycomb desiccant configuration, which was constructed from a polymer adsorbent material. The adsorption temperature (T ads ) was considered as an adjustable parameter using values of 20 °C, 25 °C, and 35 °C. Each adsorption temperature was evaluated under the time intervals for the desorption and adsorption processes (switching time: τ) of 60:60 min, 60:90 min, 60:120 min, and 90:120 min. For the given parameters, the desorption temperature and mass flow rate of the air were kept unchanged at 55 °C and 0.1 kg/s, respectively. The results showed that the Nu and Sh are more evenly responsive to change of adsorption temperature than switching time. Low desorption temperature results in high values of Nu and Sh. However, variation of switching time produces little change in Nu and Sh. Empirical correlations were also developed in this study. The empirical correlations matched the experimental data well.

UR - http://www.scopus.com/inward/record.url?scp=85052530907&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85052530907&partnerID=8YFLogxK

U2 - 10.1016/j.applthermaleng.2018.08.066

DO - 10.1016/j.applthermaleng.2018.08.066

M3 - Article

AN - SCOPUS:85052530907

VL - 144

SP - 658

EP - 669

JO - Applied Thermal Engineering

JF - Applied Thermal Engineering

SN - 1359-4311

ER -