Analysis of tensile deformation behaviors of Ti-XNb-10Ta-5Zr alloys for biomedical applications

Nobuhito Sakaguchi, Mitsuo Niinomi, Toshikazu Akahori, Hiroyuki Toda

研究成果: ジャーナルへの寄稿学術誌査読

2 被引用数 (Scopus)

抄録

Ti-XNb-10Ta-5Zr alloys were fabricated based on Ti-30Nb-10Ta-5Zr alloy, which was the composition that simplified that of Ti-29Nb-13Ta-4.6Zr alloy for biomedical applications. The tensile deformation mechanisms of the Ti-25Nb-10Ta-5Zr, Ti-30Nb-10Ta-5Zr, and Ti-35Nb-10Ta-5Zr alloys were investigated using X-ray diffraction analysis under several loading conditions. Under loading conditions, the X-ray diffraction peaks of all specimens in this study shift to higher angles than those obtained under non-loading conditions. In the crystal orientation of Ti-30Nb-10Ta-5Zr alloy, in which the lattice strain has reached the maximum elastic lattice strain, plastic deformation (for example slip) is moved with elastic deformation. Therefore, the elastic modulus of this alloy appears to decrease in terms of strain over a proportional limit. Thus, the elastic deformation behavior of the Ti-30Nb-10Ta-5Zr alloy does not obey Hooke's law.

本文言語英語
ページ(範囲)572-578
ページ数7
ジャーナルNippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals
70
7
DOI
出版ステータス出版済み - 7月 1 2006
外部発表はい

!!!All Science Journal Classification (ASJC) codes

  • 凝縮系物理学
  • 材料力学
  • 金属および合金
  • 材料化学

フィンガープリント

「Analysis of tensile deformation behaviors of Ti-XNb-10Ta-5Zr alloys for biomedical applications」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル