AP-FIM study on the effect of Mo addition on microstructure in Ti-Nb steel

R. Uemori, R. Chijiiwa, H. Tamehiro, H. Morikawa

研究成果: ジャーナルへの寄稿学術誌査読

62 被引用数 (Scopus)

抄録

AP-FIM technique was applied successfully to analyze the strengthening mechanism of a newly developed Ti-Nb-Mo-bearing fire-resistant steel, which maintained high yield strength at elevated temperatures. FIM observations of Ti-Nb-Mo and Ti-Nb steels before and after aging at 873 K for 0.9 ks made it clear that Nb(C, N) precipitated in ferrite matrix of Ti-Nb-Mo steel during aging was finer in size (2.3 nm) and greater in number than that of Ti-Nb steel. In the as-hot-rolled condition, corresponding to the situation before aging of those steels, a similar tendency was recognized with Nb(C, N), being coarse in size and small in number. These facts suggest that precipitation hardening of Nb(C, N) at 873 K and room temperature in Ti-Nb-Mo steel is higher than that in Ti-Nb steel. AP analyses of Mo-bearing steels, Ti-Mo steel and Ti-Nb-Mo steel, before and after aging, clearly yielded us two important facts. One was that almost all Mo atoms were in solution in ferrite matrix of both of the Mo-bearing steels, which suggested Mo solid-solution hardening was equal for both of the Mo-bearing steels. The other was that Mo atoms strongly segregated at the Nb(C, N)/ferrite matrix interface in Ti-Nb-Mo steel, which probably suppressed the diffusion of Nb atoms into Nb(C, N) from ferrite matrix. This directly results in fine precipitates in Ti-Nb-Mo steel.

本文言語英語
ページ(範囲)255-260
ページ数6
ジャーナルApplied Surface Science
76-77
C
DOI
出版ステータス出版済み - 3月 2 1994
外部発表はい

!!!All Science Journal Classification (ASJC) codes

  • 化学 (全般)
  • 凝縮系物理学
  • 物理学および天文学(全般)
  • 表面および界面
  • 表面、皮膜および薄膜

フィンガープリント

「AP-FIM study on the effect of Mo addition on microstructure in Ti-Nb steel」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル