Application and characterization of 12-phase AC arc for glass in-flight melting

Yaochun Yao, Takayuki Watanabe, Kazuyuki Yatsuda

研究成果: 書籍/レポート タイプへの寄稿会議への寄与

抄録

A stable 12-phase AC arc was successfully generated and applied in the field of glass in-flight melting, the arc behavior was characterized by image analysis. The effects of electrode configuration and sheath gas flow rate on arc and melting behavior of granulated glass raw material were investigated. Results show that different electrode configurations leads to various arc discharge and high-temperature region. The luminance area with high-temperature region and its fluctuation reflect the change of arc discharge behavior. The vitrification degree of glass raw material is mostly dependent on the center temperature of arc. As the sheath gas flow rate increases, the ratio of luminance area decreases and the center temperature of arc increases.

本文言語英語
ホスト出版物のタイトルManufacturing Science and Materials Engineering
ページ637-642
ページ数6
DOI
出版ステータス出版済み - 2012
外部発表はい
イベント2010 International Conference on Manufacturing Science and Materials Engineering, ICMSME 2011 - Shanghai, 中国
継続期間: 10月 14 201110月 15 2011

出版物シリーズ

名前Advanced Materials Research
443-444
ISSN(印刷版)1022-6680

その他

その他2010 International Conference on Manufacturing Science and Materials Engineering, ICMSME 2011
国/地域中国
CityShanghai
Period10/14/1110/15/11

!!!All Science Journal Classification (ASJC) codes

  • 工学(全般)

フィンガープリント

「Application and characterization of 12-phase AC arc for glass in-flight melting」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル