TY - JOUR
T1 - Application of 3-dimensional powder laminating fabrication to metallic components
AU - Minagawa, Kazumi
AU - Ida, Keisuke
AU - Kakisawa, Hideki
AU - Takamori, Susumu
AU - Osawa, Yoshiaki
AU - Hayashi, Terutake
AU - Maekawa, Katuhiro
PY - 2004/10
Y1 - 2004/10
N2 - We studied the 3-Dimensional Printing method to fabricate the metallic components from powder. The laminating fabrication by starch-coated metal powder was proposed as rapid prototyping. In this research, the effects of the drying time, laminating pitch, size of adherent powder, and the starch-coating thickness on the handling of green body were investigated. Based on the obtained results, the optimum process conditions were determined.
AB - We studied the 3-Dimensional Printing method to fabricate the metallic components from powder. The laminating fabrication by starch-coated metal powder was proposed as rapid prototyping. In this research, the effects of the drying time, laminating pitch, size of adherent powder, and the starch-coating thickness on the handling of green body were investigated. Based on the obtained results, the optimum process conditions were determined.
UR - http://www.scopus.com/inward/record.url?scp=11144313038&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=11144313038&partnerID=8YFLogxK
U2 - 10.2497/jjspm.51.756
DO - 10.2497/jjspm.51.756
M3 - Article
AN - SCOPUS:11144313038
VL - 51
SP - 756
EP - 760
JO - Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy
JF - Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy
SN - 0532-8799
IS - 10
ER -