Application of graphite-solid electrolyte composite anode in all-solid-state lithium secondary battery with Li2S positive electrode

Tomonari Takeuchi, Hiroyuki Kageyama, Koji Nakanishi, Toshiaki Ohta, Atsushi Sakuda, Tetsuo Sakai, Hironori Kobayashi, Hikari Sakaebe, Kuniaki Tatsumi, Zempachi Ogumi

研究成果: Contribution to journalArticle査読

27 被引用数 (Scopus)

抄録

Graphite-solid electrolyte (SE) composite anode, prepared by spark-plasma-sintering (SPS) process, was applied to all-solid-state lithium secondary batteries with lithium sulfide (Li2S) positive electrode. The electrochemical tests demonstrated that the graphite-SE/Li2S cells showed the discharge capacity of ca. 750 mAh·g - 1-Li2S with the average voltage of ca. 1.98 V. Although the discharge capacity was lower than that of the In/Li2S cells (ca. 920 mAh·g- 1-Li2S), the estimated energy density was higher than that (ca. 1490 and 1220 mWh·g- 1-Li 2S for graphite-SE/Li2S and In/Li2S cells, respectively), due mainly to its higher average voltage. The graphite-SE/Li 2S cells showed improved rate capability as compared with the cells with the graphite + SE blended powder, which was attributable mainly to the reduced interfacial resistance between the graphite and SE particles caused by the SPS process.

本文言語英語
ページ(範囲)138-142
ページ数5
ジャーナルSolid State Ionics
262
DOI
出版ステータス出版済み - 9 1 2014
外部発表はい

All Science Journal Classification (ASJC) codes

  • 化学 (全般)
  • 材料科学(全般)
  • 凝縮系物理学

フィンガープリント

「Application of graphite-solid electrolyte composite anode in all-solid-state lithium secondary battery with Li<sub>2</sub>S positive electrode」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル