Application of jig separator to recycle plastics used in electrical appliances

Masami Tsunekawa, Kunihiro Hori, Tsuyoshi Hirajima, Naoki Hiroyoshi, Masazumi Ito

研究成果: 著書/レポートタイプへの貢献会議での発言

2 引用 (Scopus)

抄録

Development of mechanical separation of different plastics is essential in planning and constructing a recycling plant that processes scrapped office and home appliances. The authors have developed a plastic separator using a TACUB jig. Jig separation for plastics of smaller sizes (0.5-2 mm) but similar specific gravities was performed using polyvinyl chloride (PVC) and polyethylene (PE) from scrap electric wires. High-grade PE and PVC products over 99.8% were obtained under pulsation of smaller frequency and amplitude than that for coarser plastics. For the plastics from scrap copying machines containing polystyrene (PS), acrylonitrile butadiene styrene (ABS), and polyethylene terephthalate (PET), high grades (>99%) of each plastic were recovered in the two cells of the jig, where PET, is recovered from the first cell as a bottom product, and ABS and PS from the second cell as bottom and upper layer products, respectively. Their sizes ranged from 3.5-10mm and their specific gravities were 1.03, 1.22 and 1.71 for PS, ABS, and PET respectively. Based on the results, a recycling plant for processing scrap office and home appliances had been constructed.

元の言語英語
ホスト出版物のタイトルREWAS'04 - Global Symposium on Recycling, Waste Treatment and Clean Technology - Proceedings
編集者I. Gaballah, B. Mishra, R. Solozabal, M. Tanaka
ページ1651-1660
ページ数10
出版物ステータス出版済み - 12 1 2005
イベントREWAS'04 - Global Symposium on Recycling, Waste Treatment and Clean Technology - Madrid, スペイン
継続期間: 9 26 20049 29 2004

出版物シリーズ

名前REWAS'04 - Global Symposium on Recycling, Waste Treatment and Clean Technology

その他

その他REWAS'04 - Global Symposium on Recycling, Waste Treatment and Clean Technology
スペイン
Madrid
期間9/26/049/29/04

Fingerprint

Jigs
Separators
Plastics
Butadiene
Polyethylene terephthalates
Styrene
Polystyrenes
Domestic appliances
Polyvinyl chlorides
Density (specific gravity)
Polyethylenes
Recycling
Electric wire
Copying
Planning
Processing

All Science Journal Classification (ASJC) codes

  • Engineering(all)

これを引用

Tsunekawa, M., Hori, K., Hirajima, T., Hiroyoshi, N., & Ito, M. (2005). Application of jig separator to recycle plastics used in electrical appliances. : I. Gaballah, B. Mishra, R. Solozabal, & M. Tanaka (版), REWAS'04 - Global Symposium on Recycling, Waste Treatment and Clean Technology - Proceedings (pp. 1651-1660). (REWAS'04 - Global Symposium on Recycling, Waste Treatment and Clean Technology).

Application of jig separator to recycle plastics used in electrical appliances. / Tsunekawa, Masami; Hori, Kunihiro; Hirajima, Tsuyoshi; Hiroyoshi, Naoki; Ito, Masazumi.

REWAS'04 - Global Symposium on Recycling, Waste Treatment and Clean Technology - Proceedings. 版 / I. Gaballah; B. Mishra; R. Solozabal; M. Tanaka. 2005. p. 1651-1660 (REWAS'04 - Global Symposium on Recycling, Waste Treatment and Clean Technology).

研究成果: 著書/レポートタイプへの貢献会議での発言

Tsunekawa, M, Hori, K, Hirajima, T, Hiroyoshi, N & Ito, M 2005, Application of jig separator to recycle plastics used in electrical appliances. : I Gaballah, B Mishra, R Solozabal & M Tanaka (版), REWAS'04 - Global Symposium on Recycling, Waste Treatment and Clean Technology - Proceedings. REWAS'04 - Global Symposium on Recycling, Waste Treatment and Clean Technology, pp. 1651-1660, REWAS'04 - Global Symposium on Recycling, Waste Treatment and Clean Technology, Madrid, スペイン, 9/26/04.
Tsunekawa M, Hori K, Hirajima T, Hiroyoshi N, Ito M. Application of jig separator to recycle plastics used in electrical appliances. : Gaballah I, Mishra B, Solozabal R, Tanaka M, 編集者, REWAS'04 - Global Symposium on Recycling, Waste Treatment and Clean Technology - Proceedings. 2005. p. 1651-1660. (REWAS'04 - Global Symposium on Recycling, Waste Treatment and Clean Technology).
Tsunekawa, Masami ; Hori, Kunihiro ; Hirajima, Tsuyoshi ; Hiroyoshi, Naoki ; Ito, Masazumi. / Application of jig separator to recycle plastics used in electrical appliances. REWAS'04 - Global Symposium on Recycling, Waste Treatment and Clean Technology - Proceedings. 編集者 / I. Gaballah ; B. Mishra ; R. Solozabal ; M. Tanaka. 2005. pp. 1651-1660 (REWAS'04 - Global Symposium on Recycling, Waste Treatment and Clean Technology).
@inproceedings{2449e35cec6f438f833c3f56cbca7db7,
title = "Application of jig separator to recycle plastics used in electrical appliances",
abstract = "Development of mechanical separation of different plastics is essential in planning and constructing a recycling plant that processes scrapped office and home appliances. The authors have developed a plastic separator using a TACUB jig. Jig separation for plastics of smaller sizes (0.5-2 mm) but similar specific gravities was performed using polyvinyl chloride (PVC) and polyethylene (PE) from scrap electric wires. High-grade PE and PVC products over 99.8{\%} were obtained under pulsation of smaller frequency and amplitude than that for coarser plastics. For the plastics from scrap copying machines containing polystyrene (PS), acrylonitrile butadiene styrene (ABS), and polyethylene terephthalate (PET), high grades (>99{\%}) of each plastic were recovered in the two cells of the jig, where PET, is recovered from the first cell as a bottom product, and ABS and PS from the second cell as bottom and upper layer products, respectively. Their sizes ranged from 3.5-10mm and their specific gravities were 1.03, 1.22 and 1.71 for PS, ABS, and PET respectively. Based on the results, a recycling plant for processing scrap office and home appliances had been constructed.",
author = "Masami Tsunekawa and Kunihiro Hori and Tsuyoshi Hirajima and Naoki Hiroyoshi and Masazumi Ito",
year = "2005",
month = "12",
day = "1",
language = "English",
isbn = "8495520052",
series = "REWAS'04 - Global Symposium on Recycling, Waste Treatment and Clean Technology",
pages = "1651--1660",
editor = "I. Gaballah and B. Mishra and R. Solozabal and M. Tanaka",
booktitle = "REWAS'04 - Global Symposium on Recycling, Waste Treatment and Clean Technology - Proceedings",

}

TY - GEN

T1 - Application of jig separator to recycle plastics used in electrical appliances

AU - Tsunekawa, Masami

AU - Hori, Kunihiro

AU - Hirajima, Tsuyoshi

AU - Hiroyoshi, Naoki

AU - Ito, Masazumi

PY - 2005/12/1

Y1 - 2005/12/1

N2 - Development of mechanical separation of different plastics is essential in planning and constructing a recycling plant that processes scrapped office and home appliances. The authors have developed a plastic separator using a TACUB jig. Jig separation for plastics of smaller sizes (0.5-2 mm) but similar specific gravities was performed using polyvinyl chloride (PVC) and polyethylene (PE) from scrap electric wires. High-grade PE and PVC products over 99.8% were obtained under pulsation of smaller frequency and amplitude than that for coarser plastics. For the plastics from scrap copying machines containing polystyrene (PS), acrylonitrile butadiene styrene (ABS), and polyethylene terephthalate (PET), high grades (>99%) of each plastic were recovered in the two cells of the jig, where PET, is recovered from the first cell as a bottom product, and ABS and PS from the second cell as bottom and upper layer products, respectively. Their sizes ranged from 3.5-10mm and their specific gravities were 1.03, 1.22 and 1.71 for PS, ABS, and PET respectively. Based on the results, a recycling plant for processing scrap office and home appliances had been constructed.

AB - Development of mechanical separation of different plastics is essential in planning and constructing a recycling plant that processes scrapped office and home appliances. The authors have developed a plastic separator using a TACUB jig. Jig separation for plastics of smaller sizes (0.5-2 mm) but similar specific gravities was performed using polyvinyl chloride (PVC) and polyethylene (PE) from scrap electric wires. High-grade PE and PVC products over 99.8% were obtained under pulsation of smaller frequency and amplitude than that for coarser plastics. For the plastics from scrap copying machines containing polystyrene (PS), acrylonitrile butadiene styrene (ABS), and polyethylene terephthalate (PET), high grades (>99%) of each plastic were recovered in the two cells of the jig, where PET, is recovered from the first cell as a bottom product, and ABS and PS from the second cell as bottom and upper layer products, respectively. Their sizes ranged from 3.5-10mm and their specific gravities were 1.03, 1.22 and 1.71 for PS, ABS, and PET respectively. Based on the results, a recycling plant for processing scrap office and home appliances had been constructed.

UR - http://www.scopus.com/inward/record.url?scp=32044459322&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=32044459322&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:32044459322

SN - 8495520052

SN - 9788495520050

T3 - REWAS'04 - Global Symposium on Recycling, Waste Treatment and Clean Technology

SP - 1651

EP - 1660

BT - REWAS'04 - Global Symposium on Recycling, Waste Treatment and Clean Technology - Proceedings

A2 - Gaballah, I.

A2 - Mishra, B.

A2 - Solozabal, R.

A2 - Tanaka, M.

ER -