Application to cleaning of waste plastic surfaces using atmospheric non-thermal plasma jets

Masayuki Araya, Toshifumi Yuji, Takayuki Watanabe, Junzou Kashihara, Yoshitake Sumida

研究成果: ジャーナルへの寄稿学術誌査読

17 被引用数 (Scopus)

抄録

The removal of paint on the surface of waste plastics is difficult by the conventional process; in this research, a new cleaning mechanism using atmospheric plasmas was examined through optical emission spectroscopy, electron spectroscopy for chemical analysis, and scanning electron microscopy. Results indicate that an increase of pulse frequency enables for a short processing time for the removal of the paint film, signifying that the production of radicals in plasma, especially oxygen radicals, can be controlled by pulse frequency. Plasma jets were generated under the experimental conditions of an input power of 250 W to 400 W, a pulse frequency of 2 kHz to 12 kHz, and a plasma gas flow rate of 30 L/min. Examination of the intensity ratio of the reactive species, as measured by emission spectroscopy, showed that the O/N value increased with an increase in pulse frequency. Results of analysis with electron spectroscopy for chemical analysis show that nitrogen atoms and molybdenum in only the paint film decreased through plasma processing.

本文言語英語
ページ(範囲)4301-4307
ページ数7
ジャーナルThin Solid Films
515
9
DOI
出版ステータス出版済み - 3月 12 2007
外部発表はい

!!!All Science Journal Classification (ASJC) codes

  • 電子材料、光学材料、および磁性材料
  • 表面および界面
  • 表面、皮膜および薄膜
  • 金属および合金
  • 材料化学

フィンガープリント

「Application to cleaning of waste plastic surfaces using atmospheric non-thermal plasma jets」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル