抄録
Integrating in situ deformation and electron tomography (ET) techniques allows us to visualize the materials’ response to an applied stress with nanometer spatial resolution. The capability of structural, chemical, and morphological characterization in three-dimension real time and at sub-microscopic levels alleviates several persistent problems of two-dimensional imaging such as the projection effect and postmortem appearance. On the other hand, implementing deformation mechanism introduces additional experimental constraints that could influence the accuracy of the reconstructed volumes in a different way. To materialize quantitative and statistically relevant microstructure interpretation by time-resolved ET, we evaluated several key parameters such as angular tilt range, tilt increment, and reconstruction algorithms to characterize their influences on the accuracy of size and morphology reproducibility.
| 元の言語 | 英語 |
|---|---|
| ページ（範囲） | 20-27 |
| ページ数 | 8 |
| ジャーナル | Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science |
| 巻 | 51 |
| 発行部数 | 1 |
| DOI | |
| 出版物ステータス | 出版済み - 1 1 2020 |
| 外部発表 | Yes |
Fingerprint
All Science Journal Classification (ASJC) codes
- Condensed Matter Physics
- Mechanics of Materials
- Metals and Alloys
これを引用
Assessing Experimental Parameter Space for Achieving Quantitative Electron Tomography for Nanometer-Scale Plastic Deformation. / Yu, Ya Peng; Furukawa, Hiromitsu; Horii, Noritaka; Murayama, Mitsuhiro.
：: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 巻 51, 番号 1, 01.01.2020, p. 20-27.研究成果: ジャーナルへの寄稿 › 記事
}
TY - JOUR
T1 - Assessing Experimental Parameter Space for Achieving Quantitative Electron Tomography for Nanometer-Scale Plastic Deformation
AU - Yu, Ya Peng
AU - Furukawa, Hiromitsu
AU - Horii, Noritaka
AU - Murayama, Mitsuhiro
PY - 2020/1/1
Y1 - 2020/1/1
N2 - Integrating in situ deformation and electron tomography (ET) techniques allows us to visualize the materials’ response to an applied stress with nanometer spatial resolution. The capability of structural, chemical, and morphological characterization in three-dimension real time and at sub-microscopic levels alleviates several persistent problems of two-dimensional imaging such as the projection effect and postmortem appearance. On the other hand, implementing deformation mechanism introduces additional experimental constraints that could influence the accuracy of the reconstructed volumes in a different way. To materialize quantitative and statistically relevant microstructure interpretation by time-resolved ET, we evaluated several key parameters such as angular tilt range, tilt increment, and reconstruction algorithms to characterize their influences on the accuracy of size and morphology reproducibility.
AB - Integrating in situ deformation and electron tomography (ET) techniques allows us to visualize the materials’ response to an applied stress with nanometer spatial resolution. The capability of structural, chemical, and morphological characterization in three-dimension real time and at sub-microscopic levels alleviates several persistent problems of two-dimensional imaging such as the projection effect and postmortem appearance. On the other hand, implementing deformation mechanism introduces additional experimental constraints that could influence the accuracy of the reconstructed volumes in a different way. To materialize quantitative and statistically relevant microstructure interpretation by time-resolved ET, we evaluated several key parameters such as angular tilt range, tilt increment, and reconstruction algorithms to characterize their influences on the accuracy of size and morphology reproducibility.
UR - http://www.scopus.com/inward/record.url?scp=85068869423&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=85068869423&partnerID=8YFLogxK
U2 - 10.1007/s11661-019-05345-3
DO - 10.1007/s11661-019-05345-3
M3 - Article
AN - SCOPUS:85068869423
VL - 51
SP - 20
EP - 27
JO - Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
JF - Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
SN - 1073-5623
IS - 1
ER -