At-Sea experiment of a hybrid spar type offshore wind turbine

Shigesuke Ishida, Kentaroh Kokubun, Tadashi Nimura, Tomoaki Utsunomiya, Iku Sato, Shigeo Yoshida

研究成果: Chapter in Book/Report/Conference proceedingConference contribution

17 被引用数 (Scopus)

抄録

Ministry of the Environment of Japan started the national demonstration project of Floating Offshore Wind Turbine (FOWT) in 2010 FY. In this project two SPARs with different scales are used. The first half-sized model, supporting a 100kW wind turbine, was installed in 2012 and is currently in operation. It is characteristic that the floater has a hybrid structure, i.e., the upper part is constructed of steel and the lower part of pre-stressed concrete and that the turbine is downwind type of horizontal axis. The FOWT is equipped with many sensors for measuring motions of 6 DOF, the strain of the steel / concrete parts and other factors. In this paper the measuring system is presented. In September 2012, the FOWT was attacked by a huge typhoon and it survived, although the measured wave height exceeded the designed value. The measured record of the floater in the storm is also presented.

本文言語英語
ホスト出版物のタイトルASME 2013 32nd International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2013
DOI
出版ステータス出版済み - 12 1 2013
外部発表はい
イベントASME 2013 32nd International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2013 - Nantes, フランス
継続期間: 6 9 20136 14 2013

出版物シリーズ

名前Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering - OMAE
8

その他

その他ASME 2013 32nd International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2013
Countryフランス
CityNantes
Period6/9/136/14/13

All Science Journal Classification (ASJC) codes

  • Ocean Engineering
  • Energy Engineering and Power Technology
  • Mechanical Engineering

フィンガープリント 「At-Sea experiment of a hybrid spar type offshore wind turbine」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル