Axial resolver based on the orientation dependent permeability of a grain-oriented silicon steel using multiple 8 -shaped coils

Kotaro Nakashima, Ichiro Sasada

研究成果: ジャーナルへの寄稿記事

抄録

We have tested orthogonally stacked figure-of-eight flexible coils to detect the rotation angle of a rotor made of the grain oriented silicon steel. In this scheme, an angle between the axis of the uniaxial anisotropy pertaining to the rotor and the prefixed axis of a flexible coil is related to the orientation dependent permeability. A 15 mm by 15 mm size flexible coil is placed closely to the rotor and the other side of the coil is covered with an amorphous tape working as a back yoke. One of the figure-of-eight coils is used as an excitation coil and the other is for a sensing coil of magnetic fluxes passing through the rotor. With an excitation current of frequency 16 kHz and 50 mA, a demodulated output of a sinusoidal waveform under the constant rate of revolution of 3000 rpm was obtained with a rotor of 7.6 cm in diameter. The scheme was further developed to obtain two phase outputs by combining two sets of the flexible coils, where coils in one group is 45 degree angle rotated from those in the other group. Basic characteristics of a developed axial resolver were investigated.

元の言語英語
ページ(範囲)422-427
ページ数6
ジャーナルIEEJ Transactions on Fundamentals and Materials
134
発行部数6
DOI
出版物ステータス出版済み - 1 1 2014

Fingerprint

Silicon steel
Rotors
Magnetic flux
Tapes
Anisotropy

All Science Journal Classification (ASJC) codes

  • Electrical and Electronic Engineering

これを引用

Axial resolver based on the orientation dependent permeability of a grain-oriented silicon steel using multiple 8 -shaped coils. / Nakashima, Kotaro; Sasada, Ichiro.

:: IEEJ Transactions on Fundamentals and Materials, 巻 134, 番号 6, 01.01.2014, p. 422-427.

研究成果: ジャーナルへの寄稿記事

@article{ac705b744aa54bbc8721ae28fe2807c8,
title = "Axial resolver based on the orientation dependent permeability of a grain-oriented silicon steel using multiple 8 -shaped coils",
abstract = "We have tested orthogonally stacked figure-of-eight flexible coils to detect the rotation angle of a rotor made of the grain oriented silicon steel. In this scheme, an angle between the axis of the uniaxial anisotropy pertaining to the rotor and the prefixed axis of a flexible coil is related to the orientation dependent permeability. A 15 mm by 15 mm size flexible coil is placed closely to the rotor and the other side of the coil is covered with an amorphous tape working as a back yoke. One of the figure-of-eight coils is used as an excitation coil and the other is for a sensing coil of magnetic fluxes passing through the rotor. With an excitation current of frequency 16 kHz and 50 mA, a demodulated output of a sinusoidal waveform under the constant rate of revolution of 3000 rpm was obtained with a rotor of 7.6 cm in diameter. The scheme was further developed to obtain two phase outputs by combining two sets of the flexible coils, where coils in one group is 45 degree angle rotated from those in the other group. Basic characteristics of a developed axial resolver were investigated.",
author = "Kotaro Nakashima and Ichiro Sasada",
year = "2014",
month = "1",
day = "1",
doi = "10.1541/ieejfms.134.422",
language = "English",
volume = "134",
pages = "422--427",
journal = "IEEJ Transactions on Fundamentals and Materials",
issn = "0385-4205",
publisher = "一般社団法人 電気学会",
number = "6",

}

TY - JOUR

T1 - Axial resolver based on the orientation dependent permeability of a grain-oriented silicon steel using multiple 8 -shaped coils

AU - Nakashima, Kotaro

AU - Sasada, Ichiro

PY - 2014/1/1

Y1 - 2014/1/1

N2 - We have tested orthogonally stacked figure-of-eight flexible coils to detect the rotation angle of a rotor made of the grain oriented silicon steel. In this scheme, an angle between the axis of the uniaxial anisotropy pertaining to the rotor and the prefixed axis of a flexible coil is related to the orientation dependent permeability. A 15 mm by 15 mm size flexible coil is placed closely to the rotor and the other side of the coil is covered with an amorphous tape working as a back yoke. One of the figure-of-eight coils is used as an excitation coil and the other is for a sensing coil of magnetic fluxes passing through the rotor. With an excitation current of frequency 16 kHz and 50 mA, a demodulated output of a sinusoidal waveform under the constant rate of revolution of 3000 rpm was obtained with a rotor of 7.6 cm in diameter. The scheme was further developed to obtain two phase outputs by combining two sets of the flexible coils, where coils in one group is 45 degree angle rotated from those in the other group. Basic characteristics of a developed axial resolver were investigated.

AB - We have tested orthogonally stacked figure-of-eight flexible coils to detect the rotation angle of a rotor made of the grain oriented silicon steel. In this scheme, an angle between the axis of the uniaxial anisotropy pertaining to the rotor and the prefixed axis of a flexible coil is related to the orientation dependent permeability. A 15 mm by 15 mm size flexible coil is placed closely to the rotor and the other side of the coil is covered with an amorphous tape working as a back yoke. One of the figure-of-eight coils is used as an excitation coil and the other is for a sensing coil of magnetic fluxes passing through the rotor. With an excitation current of frequency 16 kHz and 50 mA, a demodulated output of a sinusoidal waveform under the constant rate of revolution of 3000 rpm was obtained with a rotor of 7.6 cm in diameter. The scheme was further developed to obtain two phase outputs by combining two sets of the flexible coils, where coils in one group is 45 degree angle rotated from those in the other group. Basic characteristics of a developed axial resolver were investigated.

UR - http://www.scopus.com/inward/record.url?scp=84901816295&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84901816295&partnerID=8YFLogxK

U2 - 10.1541/ieejfms.134.422

DO - 10.1541/ieejfms.134.422

M3 - Article

AN - SCOPUS:84901816295

VL - 134

SP - 422

EP - 427

JO - IEEJ Transactions on Fundamentals and Materials

JF - IEEJ Transactions on Fundamentals and Materials

SN - 0385-4205

IS - 6

ER -