Boiling Heat Transfer and Pressure Drop of a Refrigerant R32 Flowing in a Small Horizontal Tube

Yudai Matsuse, Koji Enoki, Hideo Mori, Keishi Kariya, Yoshinori Hamamoto

研究成果: ジャーナルへの寄稿記事

2 引用 (Scopus)

抄録

In this study, experiments were performed to examine characteristics of flow boiling heat transfer and pressure drop of a low global warming potential refrigerant R32 flowing in a horizontal copper circular tube with 1.0 mm inside diameter for the development of a high-performance heat exchanger using small-diameter tubes or minichannels for air conditioning systems. Axially local heat transfer coefficients were measured in the range of mass fluxes from 30 to 400 kg/(m2·s), qualities from 0.05 to 1.0, and heat fluxes from 2 to 24 kW/m2 at the saturation temperature of 10°C. Pressure drops were also measured in the rage of mass fluxes from 30 to 400 kg/(m2·s) and qualities from 0.05 to 0.9 at the saturation temperature of 10°C under adiabatic condition. In addition, two-phase flow patterns were observed through a sight glass fixed at the tube exit with a digital camera. The characteristics of boiling heat transfer and pressure drop were clarified based on the measurements and the comparison with data of R410A obtained previously. Also, measured heat transfer coefficients were compared with two existing correlations.

元の言語英語
ページ(範囲)668-678
ページ数11
ジャーナルHeat Transfer Engineering
37
発行部数7-8
DOI
出版物ステータス出版済み - 5 23 2016

Fingerprint

refrigerants
Refrigerants
pressure drop
boiling
Boiling liquids
Pressure drop
heat transfer
tubes
Heat transfer
heat transfer coefficients
Heat transfer coefficients
Mass transfer
adiabatic conditions
saturation
circular tubes
air conditioning
global warming
digital cameras
visual perception
Digital cameras

All Science Journal Classification (ASJC) codes

  • Condensed Matter Physics
  • Mechanical Engineering
  • Fluid Flow and Transfer Processes

これを引用

Boiling Heat Transfer and Pressure Drop of a Refrigerant R32 Flowing in a Small Horizontal Tube. / Matsuse, Yudai; Enoki, Koji; Mori, Hideo; Kariya, Keishi; Hamamoto, Yoshinori.

:: Heat Transfer Engineering, 巻 37, 番号 7-8, 23.05.2016, p. 668-678.

研究成果: ジャーナルへの寄稿記事

Matsuse, Yudai ; Enoki, Koji ; Mori, Hideo ; Kariya, Keishi ; Hamamoto, Yoshinori. / Boiling Heat Transfer and Pressure Drop of a Refrigerant R32 Flowing in a Small Horizontal Tube. :: Heat Transfer Engineering. 2016 ; 巻 37, 番号 7-8. pp. 668-678.
@article{921cdccda4cc4d07b675a28787f9d365,
title = "Boiling Heat Transfer and Pressure Drop of a Refrigerant R32 Flowing in a Small Horizontal Tube",
abstract = "In this study, experiments were performed to examine characteristics of flow boiling heat transfer and pressure drop of a low global warming potential refrigerant R32 flowing in a horizontal copper circular tube with 1.0 mm inside diameter for the development of a high-performance heat exchanger using small-diameter tubes or minichannels for air conditioning systems. Axially local heat transfer coefficients were measured in the range of mass fluxes from 30 to 400 kg/(m2·s), qualities from 0.05 to 1.0, and heat fluxes from 2 to 24 kW/m2 at the saturation temperature of 10°C. Pressure drops were also measured in the rage of mass fluxes from 30 to 400 kg/(m2·s) and qualities from 0.05 to 0.9 at the saturation temperature of 10°C under adiabatic condition. In addition, two-phase flow patterns were observed through a sight glass fixed at the tube exit with a digital camera. The characteristics of boiling heat transfer and pressure drop were clarified based on the measurements and the comparison with data of R410A obtained previously. Also, measured heat transfer coefficients were compared with two existing correlations.",
author = "Yudai Matsuse and Koji Enoki and Hideo Mori and Keishi Kariya and Yoshinori Hamamoto",
year = "2016",
month = "5",
day = "23",
doi = "10.1080/01457632.2015.1067057",
language = "English",
volume = "37",
pages = "668--678",
journal = "Heat Transfer Engineering",
issn = "0145-7632",
publisher = "Taylor and Francis Ltd.",
number = "7-8",

}

TY - JOUR

T1 - Boiling Heat Transfer and Pressure Drop of a Refrigerant R32 Flowing in a Small Horizontal Tube

AU - Matsuse, Yudai

AU - Enoki, Koji

AU - Mori, Hideo

AU - Kariya, Keishi

AU - Hamamoto, Yoshinori

PY - 2016/5/23

Y1 - 2016/5/23

N2 - In this study, experiments were performed to examine characteristics of flow boiling heat transfer and pressure drop of a low global warming potential refrigerant R32 flowing in a horizontal copper circular tube with 1.0 mm inside diameter for the development of a high-performance heat exchanger using small-diameter tubes or minichannels for air conditioning systems. Axially local heat transfer coefficients were measured in the range of mass fluxes from 30 to 400 kg/(m2·s), qualities from 0.05 to 1.0, and heat fluxes from 2 to 24 kW/m2 at the saturation temperature of 10°C. Pressure drops were also measured in the rage of mass fluxes from 30 to 400 kg/(m2·s) and qualities from 0.05 to 0.9 at the saturation temperature of 10°C under adiabatic condition. In addition, two-phase flow patterns were observed through a sight glass fixed at the tube exit with a digital camera. The characteristics of boiling heat transfer and pressure drop were clarified based on the measurements and the comparison with data of R410A obtained previously. Also, measured heat transfer coefficients were compared with two existing correlations.

AB - In this study, experiments were performed to examine characteristics of flow boiling heat transfer and pressure drop of a low global warming potential refrigerant R32 flowing in a horizontal copper circular tube with 1.0 mm inside diameter for the development of a high-performance heat exchanger using small-diameter tubes or minichannels for air conditioning systems. Axially local heat transfer coefficients were measured in the range of mass fluxes from 30 to 400 kg/(m2·s), qualities from 0.05 to 1.0, and heat fluxes from 2 to 24 kW/m2 at the saturation temperature of 10°C. Pressure drops were also measured in the rage of mass fluxes from 30 to 400 kg/(m2·s) and qualities from 0.05 to 0.9 at the saturation temperature of 10°C under adiabatic condition. In addition, two-phase flow patterns were observed through a sight glass fixed at the tube exit with a digital camera. The characteristics of boiling heat transfer and pressure drop were clarified based on the measurements and the comparison with data of R410A obtained previously. Also, measured heat transfer coefficients were compared with two existing correlations.

UR - http://www.scopus.com/inward/record.url?scp=84946925367&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84946925367&partnerID=8YFLogxK

U2 - 10.1080/01457632.2015.1067057

DO - 10.1080/01457632.2015.1067057

M3 - Article

AN - SCOPUS:84946925367

VL - 37

SP - 668

EP - 678

JO - Heat Transfer Engineering

JF - Heat Transfer Engineering

SN - 0145-7632

IS - 7-8

ER -