Carbon-free all-in-one electrode using porous Ti sheet for PEFCs

Daiki Kawachino, Masahiro Yasutake, Hirotoshi Odoi, Zhiyun Noda, Junko Matsuda, Akari Hayashi, Kazunari Sasaki

研究成果: 著書/レポートタイプへの貢献会議での発言

1 引用 (Scopus)

抄録

Carbon black support is generally used for PEFC electrocatalysts, while their durability is an important technological issue caused by e.g. Carbon corrosion. Metal oxide supports have been studied as alternatives to carbon black. TiOj has also been considered as an alternative support material due to its stability under both cathode and anode conditions. Here, a Ti-based sheet-form electrode is developed, consisting of Pt electrocatalysts, and a porous metallic Ti sheet acting as both catalyst support and gas diffusion layer (GDL). Ti-based nanofibers with a diameter of several run were formed on the surface of the porous Ti sheet via NaOH treatment. Pt catalysts were successfully decorated on such nanostructure to construct a three-dimensional network structure in a carbon-free all-in-one electrode for PEFCs.

元の言語英語
ホスト出版物のタイトルECS Transactions
編集者C. Coutanceau, S. Narayan, Y.-T. Kim, Y. Gochi-Ponce, B.S. Pivovar, T.F. Fuller, R.A. Mantz, P. Shirvanian, D.J. Jones, F. Buechi, V.K. Ramani, J.M. Fenton, K.E. Swider-Lyons, T.J. Schmidt, K.E. Ayers, A.Z. Weber, P.N. Pintauro, P. Strasser, H. Xu, S. Mitsushima, H. Gasteiger, H. Uchida
出版者Electrochemical Society Inc.
ページ541-547
ページ数7
エディション13
ISBN(電子版)9781607685395
DOI
出版物ステータス出版済み - 1 1 2018
イベントSymposium on Polymer Electrolyte Fuel Cells and Electrolyzers 18, PEFC and E 2018 - AiMES 2018, ECS and SMEQ Joint International Meeting - Cancun, メキシコ
継続期間: 9 30 201810 4 2018

出版物シリーズ

名前ECS Transactions
番号13
86
ISSN(印刷物)1938-6737
ISSN(電子版)1938-5862

その他

その他Symposium on Polymer Electrolyte Fuel Cells and Electrolyzers 18, PEFC and E 2018 - AiMES 2018, ECS and SMEQ Joint International Meeting
メキシコ
Cancun
期間9/30/1810/4/18

Fingerprint

Electrocatalysts
Carbon black
Catalyst supports
Electrodes
Carbon
Diffusion in gases
Nanofibers
Nanostructures
Anodes
Durability
Cathodes
Corrosion
Catalysts
Oxides
Metals

All Science Journal Classification (ASJC) codes

  • Engineering(all)

これを引用

Kawachino, D., Yasutake, M., Odoi, H., Noda, Z., Matsuda, J., Hayashi, A., & Sasaki, K. (2018). Carbon-free all-in-one electrode using porous Ti sheet for PEFCs. : C. Coutanceau, S. Narayan, Y-T. Kim, Y. Gochi-Ponce, B. S. Pivovar, T. F. Fuller, R. A. Mantz, P. Shirvanian, D. J. Jones, F. Buechi, V. K. Ramani, J. M. Fenton, K. E. Swider-Lyons, T. J. Schmidt, K. E. Ayers, A. Z. Weber, P. N. Pintauro, P. Strasser, H. Xu, S. Mitsushima, H. Gasteiger, ... H. Uchida (版), ECS Transactions (13 版, pp. 541-547). (ECS Transactions; 巻数 86, 番号 13). Electrochemical Society Inc.. https://doi.org/10.1149/08613.0541ecst

Carbon-free all-in-one electrode using porous Ti sheet for PEFCs. / Kawachino, Daiki; Yasutake, Masahiro; Odoi, Hirotoshi; Noda, Zhiyun; Matsuda, Junko; Hayashi, Akari; Sasaki, Kazunari.

ECS Transactions. 版 / C. Coutanceau; S. Narayan; Y.-T. Kim; Y. Gochi-Ponce; B.S. Pivovar; T.F. Fuller; R.A. Mantz; P. Shirvanian; D.J. Jones; F. Buechi; V.K. Ramani; J.M. Fenton; K.E. Swider-Lyons; T.J. Schmidt; K.E. Ayers; A.Z. Weber; P.N. Pintauro; P. Strasser; H. Xu; S. Mitsushima; H. Gasteiger; H. Uchida. 13. 編 Electrochemical Society Inc., 2018. p. 541-547 (ECS Transactions; 巻 86, 番号 13).

研究成果: 著書/レポートタイプへの貢献会議での発言

Kawachino, D, Yasutake, M, Odoi, H, Noda, Z, Matsuda, J, Hayashi, A & Sasaki, K 2018, Carbon-free all-in-one electrode using porous Ti sheet for PEFCs. : C Coutanceau, S Narayan, Y-T Kim, Y Gochi-Ponce, BS Pivovar, TF Fuller, RA Mantz, P Shirvanian, DJ Jones, F Buechi, VK Ramani, JM Fenton, KE Swider-Lyons, TJ Schmidt, KE Ayers, AZ Weber, PN Pintauro, P Strasser, H Xu, S Mitsushima, H Gasteiger & H Uchida (版), ECS Transactions. 13 Edn, ECS Transactions, 番号 13, 巻. 86, Electrochemical Society Inc., pp. 541-547, Symposium on Polymer Electrolyte Fuel Cells and Electrolyzers 18, PEFC and E 2018 - AiMES 2018, ECS and SMEQ Joint International Meeting, Cancun, メキシコ, 9/30/18. https://doi.org/10.1149/08613.0541ecst
Kawachino D, Yasutake M, Odoi H, Noda Z, Matsuda J, Hayashi A その他. Carbon-free all-in-one electrode using porous Ti sheet for PEFCs. : Coutanceau C, Narayan S, Kim Y-T, Gochi-Ponce Y, Pivovar BS, Fuller TF, Mantz RA, Shirvanian P, Jones DJ, Buechi F, Ramani VK, Fenton JM, Swider-Lyons KE, Schmidt TJ, Ayers KE, Weber AZ, Pintauro PN, Strasser P, Xu H, Mitsushima S, Gasteiger H, Uchida H, 編集者, ECS Transactions. 13 版 Electrochemical Society Inc. 2018. p. 541-547. (ECS Transactions; 13). https://doi.org/10.1149/08613.0541ecst
Kawachino, Daiki ; Yasutake, Masahiro ; Odoi, Hirotoshi ; Noda, Zhiyun ; Matsuda, Junko ; Hayashi, Akari ; Sasaki, Kazunari. / Carbon-free all-in-one electrode using porous Ti sheet for PEFCs. ECS Transactions. 編集者 / C. Coutanceau ; S. Narayan ; Y.-T. Kim ; Y. Gochi-Ponce ; B.S. Pivovar ; T.F. Fuller ; R.A. Mantz ; P. Shirvanian ; D.J. Jones ; F. Buechi ; V.K. Ramani ; J.M. Fenton ; K.E. Swider-Lyons ; T.J. Schmidt ; K.E. Ayers ; A.Z. Weber ; P.N. Pintauro ; P. Strasser ; H. Xu ; S. Mitsushima ; H. Gasteiger ; H. Uchida. 13. 版 Electrochemical Society Inc., 2018. pp. 541-547 (ECS Transactions; 13).
@inproceedings{03ba520682d344c69a7a98aed4ece26c,
title = "Carbon-free all-in-one electrode using porous Ti sheet for PEFCs",
abstract = "Carbon black support is generally used for PEFC electrocatalysts, while their durability is an important technological issue caused by e.g. Carbon corrosion. Metal oxide supports have been studied as alternatives to carbon black. TiOj has also been considered as an alternative support material due to its stability under both cathode and anode conditions. Here, a Ti-based sheet-form electrode is developed, consisting of Pt electrocatalysts, and a porous metallic Ti sheet acting as both catalyst support and gas diffusion layer (GDL). Ti-based nanofibers with a diameter of several run were formed on the surface of the porous Ti sheet via NaOH treatment. Pt catalysts were successfully decorated on such nanostructure to construct a three-dimensional network structure in a carbon-free all-in-one electrode for PEFCs.",
author = "Daiki Kawachino and Masahiro Yasutake and Hirotoshi Odoi and Zhiyun Noda and Junko Matsuda and Akari Hayashi and Kazunari Sasaki",
year = "2018",
month = "1",
day = "1",
doi = "10.1149/08613.0541ecst",
language = "English",
series = "ECS Transactions",
publisher = "Electrochemical Society Inc.",
number = "13",
pages = "541--547",
editor = "C. Coutanceau and S. Narayan and Y.-T. Kim and Y. Gochi-Ponce and B.S. Pivovar and T.F. Fuller and R.A. Mantz and P. Shirvanian and D.J. Jones and F. Buechi and V.K. Ramani and J.M. Fenton and K.E. Swider-Lyons and T.J. Schmidt and K.E. Ayers and A.Z. Weber and P.N. Pintauro and P. Strasser and H. Xu and S. Mitsushima and H. Gasteiger and H. Uchida",
booktitle = "ECS Transactions",
edition = "13",

}

TY - GEN

T1 - Carbon-free all-in-one electrode using porous Ti sheet for PEFCs

AU - Kawachino, Daiki

AU - Yasutake, Masahiro

AU - Odoi, Hirotoshi

AU - Noda, Zhiyun

AU - Matsuda, Junko

AU - Hayashi, Akari

AU - Sasaki, Kazunari

PY - 2018/1/1

Y1 - 2018/1/1

N2 - Carbon black support is generally used for PEFC electrocatalysts, while their durability is an important technological issue caused by e.g. Carbon corrosion. Metal oxide supports have been studied as alternatives to carbon black. TiOj has also been considered as an alternative support material due to its stability under both cathode and anode conditions. Here, a Ti-based sheet-form electrode is developed, consisting of Pt electrocatalysts, and a porous metallic Ti sheet acting as both catalyst support and gas diffusion layer (GDL). Ti-based nanofibers with a diameter of several run were formed on the surface of the porous Ti sheet via NaOH treatment. Pt catalysts were successfully decorated on such nanostructure to construct a three-dimensional network structure in a carbon-free all-in-one electrode for PEFCs.

AB - Carbon black support is generally used for PEFC electrocatalysts, while their durability is an important technological issue caused by e.g. Carbon corrosion. Metal oxide supports have been studied as alternatives to carbon black. TiOj has also been considered as an alternative support material due to its stability under both cathode and anode conditions. Here, a Ti-based sheet-form electrode is developed, consisting of Pt electrocatalysts, and a porous metallic Ti sheet acting as both catalyst support and gas diffusion layer (GDL). Ti-based nanofibers with a diameter of several run were formed on the surface of the porous Ti sheet via NaOH treatment. Pt catalysts were successfully decorated on such nanostructure to construct a three-dimensional network structure in a carbon-free all-in-one electrode for PEFCs.

UR - http://www.scopus.com/inward/record.url?scp=85058325856&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85058325856&partnerID=8YFLogxK

U2 - 10.1149/08613.0541ecst

DO - 10.1149/08613.0541ecst

M3 - Conference contribution

T3 - ECS Transactions

SP - 541

EP - 547

BT - ECS Transactions

A2 - Coutanceau, C.

A2 - Narayan, S.

A2 - Kim, Y.-T.

A2 - Gochi-Ponce, Y.

A2 - Pivovar, B.S.

A2 - Fuller, T.F.

A2 - Mantz, R.A.

A2 - Shirvanian, P.

A2 - Jones, D.J.

A2 - Buechi, F.

A2 - Ramani, V.K.

A2 - Fenton, J.M.

A2 - Swider-Lyons, K.E.

A2 - Schmidt, T.J.

A2 - Ayers, K.E.

A2 - Weber, A.Z.

A2 - Pintauro, P.N.

A2 - Strasser, P.

A2 - Xu, H.

A2 - Mitsushima, S.

A2 - Gasteiger, H.

A2 - Uchida, H.

PB - Electrochemical Society Inc.

ER -