Catalytic combustion-type hydrogen sensor using BaTiO 3-based PTC thermistor

Masayoshi Yuasa, Takahito Nagano, Naoki Tachibana, Tetsuya Kida, Kengo Shimanoe

研究成果: ジャーナルへの寄稿学術誌査読

14 被引用数 (Scopus)

抄録

A catalytic combustion-type gas sensor using a positive temperature coefficient (PTC) thermistor, which shows a sharp resistance change around Curie temperature, was developed for the detection of hydrogen. La-doped BaTiO 3 (Ba0.998 La0.002 TiO3) was prepared through a solid-state method and an oxalic acid method. La-doped BaTiO3 obtained by the oxalic acid method showed improved PTC properties, due to the formation of fine particles, as compared to that prepared with the solid-state method. The resulting sensor device showed a fairly high H2 sensitivity in the range of 100-1000 ppm. In addition, the H 2 sensitivity and response speed were improved by coating a Pt/SiO2 catalyst on the sensor device because the catalytic combustion efficiency of H2 was improved by the catalyst coating.

本文言語英語
ページ(範囲)1789-1794
ページ数6
ジャーナルJournal of the American Ceramic Society
96
6
DOI
出版ステータス出版済み - 6月 2013

!!!All Science Journal Classification (ASJC) codes

  • セラミックおよび複合材料
  • 材料化学

フィンガープリント

「Catalytic combustion-type hydrogen sensor using BaTiO 3-based PTC thermistor」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル