Ce0.6(Mn0.3Fe0.1)O2 as an oxidation-tolerant ceramic anode for SOFCs using LaGaO3 -based oxide electrolyte

Tatsumi Ishihara, Tae Ho Shin, Parichatr Vanalabhpatana, Koji Yonemoto, Maki Matsuka

    研究成果: ジャーナルへの寄稿学術誌査読

    25 被引用数 (Scopus)

    抄録

    The anodic performance of CeO2 doped with Mn and Fe was studied by using a Co-doped LaGaO3 -based oxide (LSGMC) electrolyte. The open-circuit potential approximate to the theoretical value (1.1 V) was exhibited on the cell using Ce(Mn,Fe)O2 oxide for the anode. A high maximum power density (0.622 W/cm2 at 1273 K) was attained by co-doping Mn and Fe into CeO2. After a few cycles of oxidation treatment at 1073 K, there was an increase in the maximum power density. Therefore, Mn- and Fe-doped CeO2 is a potential oxidation-tolerant oxide anode for solid oxide fuel cells (SOFCs) using an LSGMC-based electrolyte.

    本文言語英語
    ジャーナルElectrochemical and Solid-State Letters
    13
    8
    DOI
    出版ステータス出版済み - 2010

    !!!All Science Journal Classification (ASJC) codes

    • 電気化学
    • 電子工学および電気工学
    • 材料科学(全般)
    • 化学工学(全般)
    • 物理化学および理論化学

    フィンガープリント

    「Ce0.6(Mn0.3Fe0.1)O2 as an oxidation-tolerant ceramic anode for SOFCs using LaGaO3 -based oxide electrolyte」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

    引用スタイル