Characteristics of the Torque Sensor Using Plasma-Sprayed Ni Layer—Effect of the Heat Treatment of the Ni Layer

I. Sasada, S. Uramoto, K. Harada

研究成果: Contribution to journalArticle査読

抄録

A magnetostrictive Ni layer, plasma-sprayed onto a shaft, was used in conjunction with a pair of magnetic heads to measure the torque exerted on the shaft. Whereas the as-sprayed film had a high coercivity, annealing for two hours at from 500 to 1000°C lowered the coercivity, and caused the film to become magnetically more homogeneous. An example of the detection of transient fluctuations in the applied torque is also presented.

本文言語英語
ページ(範囲)1157-1158
ページ数2
ジャーナルIEEE Translation Journal on Magnetics in Japan
2
12
DOI
出版ステータス出版済み - 12 1987

All Science Journal Classification (ASJC) codes

  • 工学(その他)
  • 工学(全般)

フィンガープリント

「Characteristics of the Torque Sensor Using Plasma-Sprayed Ni Layer—Effect of the Heat Treatment of the Ni Layer」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル