Characteristics on HDS over amorphous silica-alumina in single and dual catalytic bed system for gas oil

Joo Il Park, Koji Nakano, Young Kwang Kim, Jin Miyawaki, Seong Ho Yoon, Isao Mochida

研究成果: ジャーナルへの寄稿学術誌査読

9 被引用数 (Scopus)

抄録

Deep hydrodesulfurization (HDS) was investigated over amorphous silica-alumina (ASA), produced using various synthetic methods as supports for NiMo catalysts, in single and dual catalytic bed systems. NiMoS active components supported on ASA-2 (ASA from synthetic method 2) achieved S levels of 4.5 and 3.0 ppm at 345 and 360 °C, respectively, in single catalytic beds, which was the highest HDS reactivity. Dual catalytic beds were introduced to inhibit excess hydro-cracking of C species in gas oil. For the dual catalytic combination of LX6 (commercial catalyst for reactive S species) and NMASA-2 (NiMoS supported on ASA-2), the S levels were 5.4 and 2 ppm at 345 and 360 °C, respectively, indicating that the performance was enhanced at higher temperatures, likely due to improved activity for refractory S species. The increased reactivity for HDS over NMASA-2 was related to the strong acidity of this support due to tetrahedrally coordinated Al species. In addition, the smaller homogeneous particle size of the support influenced the HDS catalytic performance. Moreover, weaker interactions between the Mo and ASA-2 in NMASA-2 improved the HDS reactivity, as confirmed by laser Raman spectroscopy.

本文言語英語
ページ(範囲)100-106
ページ数7
ジャーナルCatalysis Today
164
1
DOI
出版ステータス出版済み - 4月 30 2011

!!!All Science Journal Classification (ASJC) codes

  • 触媒
  • 化学 (全般)

フィンガープリント

「Characteristics on HDS over amorphous silica-alumina in single and dual catalytic bed system for gas oil」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル