Characterization of a low frequency magnetic noise from a two-stage pulse tube cryocooler

M. J. Eshraghi, I. Sasada, J. M. Kim, Y. H. Lee

研究成果: Contribution to journalArticle査読

3 被引用数 (Scopus)

抄録

Magnetic noise of a two-stage pulse tube cryocooler (PT) was measured by a fundamental mode orthogonal fluxgate magnetometer and by a LTS Double Relaxation Oscillation SQUID (DROS) first-order planar gradiometer. The magnetometer was installed in a dewar made of aluminum at 12 cm distance from a section containing magnetic regenerative materials of the second pulse tube. The magnetic noise spectrum showed a clear peak at 1.8 Hz, which is the fundamental frequency of the He gas pumping rate. The 1.8 Hz magnetic noise registered a peak, during the cooling down process, when the second cold-stage temperature was around 12 K, which is well correlated with the 1.8 Hz variation of the temperature of the second cold stage. Hence, we attributed the main source of this magnetic noise to the temperature variation of the magnetic moments resulting from magnetic regenerative materials, Er3Ni and HoCu2, in the presence of background static magnetic fields. We have also pointed out that the superconducting magnetic shield of lead sheets reduced the low frequency magnetic noise generated from the magnetic regenerative materials. With this arrangement, the magnetic noise amplitude measured with the LTS DROS gradiometer, mounted at 7 cm horizontal distance from the magnetic regenerative materials, in the optimum condition, was lower than 500 pT peak-to-peak, whereas the noise level without lead shielding was higher than the dynamic range of DROS instrumentations which was around ± 10 nT.

本文言語英語
ページ(範囲)334-339
ページ数6
ジャーナルCryogenics
49
7
DOI
出版ステータス出版済み - 7 2009

All Science Journal Classification (ASJC) codes

  • Materials Science(all)
  • Physics and Astronomy(all)

フィンガープリント 「Characterization of a low frequency magnetic noise from a two-stage pulse tube cryocooler」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル