Characterization of cell wall microstructure and damage behavior of alloyed aluminum foam via synchrotron-based microtomography

Qiang Zhang, Hiroyuki Toda, Masakazu Kobayashi, Kentaro Uesugi, Yoshio Suzuki

研究成果: ジャーナルへの寄稿記事

3 引用 (Scopus)

抄録

The internal microstructure of the high strength Al-Zn-Mg foam was characterized via the synchrotron-based X-ray microtomography. Using three-dimensional (3D) quantitative image analysis of the tomographic dataset, the microstructural features, such as content, size distribution, shape, and spatial distribution of micropores inside the cell wall, were determined. Together with a dual energy imaging technique, the 3D distribution of Zn in the alloyed foam was assessed by the subtraction of two images acquired above and below the Zn K-absorption edge. The damage behavior of the alloyed foam was also clarified by this element sensitive imaging technique. The internal microstructural features of the Al-Zn-Mg foam, such as content, size distribution, shape and spatial distribution of micro-pores inside the cell wall, were characterized via the synchrotron-based X-ray microtomography. Together with a dual energy imaging technique, the 3D distribution of Zn in the alloyed foam was assessed. The damage behavior was also clarified by this element sensitive imaging technique.

元の言語英語
ページ(範囲)149-152
ページ数4
ジャーナルAdvanced Engineering Materials
15
発行部数3
DOI
出版物ステータス出版済み - 3 1 2013
外部発表Yes

Fingerprint

Aluminum
Synchrotrons
foams
Foams
synchrotrons
Cells
damage
aluminum
imaging techniques
microstructure
Microstructure
Imaging techniques
Spatial distribution
spatial distribution
X rays
Image analysis
high strength
image analysis
subtraction
x rays

All Science Journal Classification (ASJC) codes

  • Materials Science(all)
  • Condensed Matter Physics

これを引用

Characterization of cell wall microstructure and damage behavior of alloyed aluminum foam via synchrotron-based microtomography. / Zhang, Qiang; Toda, Hiroyuki; Kobayashi, Masakazu; Uesugi, Kentaro; Suzuki, Yoshio.

:: Advanced Engineering Materials, 巻 15, 番号 3, 01.03.2013, p. 149-152.

研究成果: ジャーナルへの寄稿記事

Zhang, Qiang ; Toda, Hiroyuki ; Kobayashi, Masakazu ; Uesugi, Kentaro ; Suzuki, Yoshio. / Characterization of cell wall microstructure and damage behavior of alloyed aluminum foam via synchrotron-based microtomography. :: Advanced Engineering Materials. 2013 ; 巻 15, 番号 3. pp. 149-152.
@article{6d9bbc53787e4d43b5cff50df9d28346,
title = "Characterization of cell wall microstructure and damage behavior of alloyed aluminum foam via synchrotron-based microtomography",
abstract = "The internal microstructure of the high strength Al-Zn-Mg foam was characterized via the synchrotron-based X-ray microtomography. Using three-dimensional (3D) quantitative image analysis of the tomographic dataset, the microstructural features, such as content, size distribution, shape, and spatial distribution of micropores inside the cell wall, were determined. Together with a dual energy imaging technique, the 3D distribution of Zn in the alloyed foam was assessed by the subtraction of two images acquired above and below the Zn K-absorption edge. The damage behavior of the alloyed foam was also clarified by this element sensitive imaging technique. The internal microstructural features of the Al-Zn-Mg foam, such as content, size distribution, shape and spatial distribution of micro-pores inside the cell wall, were characterized via the synchrotron-based X-ray microtomography. Together with a dual energy imaging technique, the 3D distribution of Zn in the alloyed foam was assessed. The damage behavior was also clarified by this element sensitive imaging technique.",
author = "Qiang Zhang and Hiroyuki Toda and Masakazu Kobayashi and Kentaro Uesugi and Yoshio Suzuki",
year = "2013",
month = "3",
day = "1",
doi = "10.1002/adem.201200142",
language = "English",
volume = "15",
pages = "149--152",
journal = "Advanced Engineering Materials",
issn = "1438-1656",
publisher = "Wiley-VCH Verlag",
number = "3",

}

TY - JOUR

T1 - Characterization of cell wall microstructure and damage behavior of alloyed aluminum foam via synchrotron-based microtomography

AU - Zhang, Qiang

AU - Toda, Hiroyuki

AU - Kobayashi, Masakazu

AU - Uesugi, Kentaro

AU - Suzuki, Yoshio

PY - 2013/3/1

Y1 - 2013/3/1

N2 - The internal microstructure of the high strength Al-Zn-Mg foam was characterized via the synchrotron-based X-ray microtomography. Using three-dimensional (3D) quantitative image analysis of the tomographic dataset, the microstructural features, such as content, size distribution, shape, and spatial distribution of micropores inside the cell wall, were determined. Together with a dual energy imaging technique, the 3D distribution of Zn in the alloyed foam was assessed by the subtraction of two images acquired above and below the Zn K-absorption edge. The damage behavior of the alloyed foam was also clarified by this element sensitive imaging technique. The internal microstructural features of the Al-Zn-Mg foam, such as content, size distribution, shape and spatial distribution of micro-pores inside the cell wall, were characterized via the synchrotron-based X-ray microtomography. Together with a dual energy imaging technique, the 3D distribution of Zn in the alloyed foam was assessed. The damage behavior was also clarified by this element sensitive imaging technique.

AB - The internal microstructure of the high strength Al-Zn-Mg foam was characterized via the synchrotron-based X-ray microtomography. Using three-dimensional (3D) quantitative image analysis of the tomographic dataset, the microstructural features, such as content, size distribution, shape, and spatial distribution of micropores inside the cell wall, were determined. Together with a dual energy imaging technique, the 3D distribution of Zn in the alloyed foam was assessed by the subtraction of two images acquired above and below the Zn K-absorption edge. The damage behavior of the alloyed foam was also clarified by this element sensitive imaging technique. The internal microstructural features of the Al-Zn-Mg foam, such as content, size distribution, shape and spatial distribution of micro-pores inside the cell wall, were characterized via the synchrotron-based X-ray microtomography. Together with a dual energy imaging technique, the 3D distribution of Zn in the alloyed foam was assessed. The damage behavior was also clarified by this element sensitive imaging technique.

UR - http://www.scopus.com/inward/record.url?scp=84875170951&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84875170951&partnerID=8YFLogxK

U2 - 10.1002/adem.201200142

DO - 10.1002/adem.201200142

M3 - Article

AN - SCOPUS:84875170951

VL - 15

SP - 149

EP - 152

JO - Advanced Engineering Materials

JF - Advanced Engineering Materials

SN - 1438-1656

IS - 3

ER -