Characterization of Sol-Gel derived calcium hydroxyapatite coatings fabricated on patterned rough stainless steel surface

Vilma Jonauske, Sandra Stanionyte, Shih Wen Chen, Aleksej Zarkov, Remigijus Juskenas, Algirdas Selskis, Tadas Matijosius, Thomas C.K. Yang, Kunio Ishikawa, Rimantas Ramanauskas, Aivaras Kareiva

研究成果: Contribution to journalArticle査読

8 被引用数 (Scopus)

抄録

Sol-gel derived calcium hydroxyapatite (Ca10(PO4)6(OH)2; CHA) thin films were deposited on stainless steel substrates with transverse and longitudinal patterned roughness employing a spin-coating technique. Each layer in the preparation of CHA multilayers was separately annealed at 850 °C in air. Fabricated CHA coatings were placed in simulated body fluid (SBF) for 2, 3, and 4 weeks and investigated after withdrawal. For the evaluation of obtained and treated with SBF coatings, diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), X-ray diffraction (XRD) analysis, Raman spectroscopy, XPS spectroscopy, scanning electron microscopy (SEM) analysis, and contact angle measurements were used. The tribological properties of the CHA coatings were also investigated in this study.

本文言語英語
論文番号334
ジャーナルCoatings
9
5
DOI
出版ステータス出版済み - 5 1 2019

All Science Journal Classification (ASJC) codes

  • Surfaces and Interfaces
  • Surfaces, Coatings and Films
  • Materials Chemistry

フィンガープリント 「Characterization of Sol-Gel derived calcium hydroxyapatite coatings fabricated on patterned rough stainless steel surface」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル