Combustion rate of coke in quasi-particle at iron ore sintering process

Ko Ichiro Ohno, Keigo Noda, Koki Nishioka, Takayuki Maeda, Masakata Shimizu

    研究成果: Contribution to journalArticle査読

    4 被引用数 (Scopus)

    抄録

    Temperature distribution in layer of the iron ore sintering process is one of the most important factors to decide the sinter quality. To estimate the temperature distribution in sinter layer needs knowledge of coke combustion rate. The purpose of this study is to clarify that coke combustion rate in the fine layer of the quasi-particle with considerations about void ratio and liquid formation. The following results were obtained. Interface chemical reaction rate constant, kc, was independent on the mixing ratio of coke. The higher mixing ratio of coke made the larger effective diffusion coefficient of oxygen, because the higher mixing ratio of coke made the higher void ratio in the sample after coke combustion. The coke combustion rate became small with increasing of liquid formation amount, because liquid phase in quasi-particle prevented oxygen diffusion in there.

    本文言語英語
    ページ(範囲)184-189
    ページ数6
    ジャーナルTetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan
    101
    3
    DOI
    出版ステータス出版済み - 2015

    All Science Journal Classification (ASJC) codes

    • 凝縮系物理学
    • 物理化学および理論化学
    • 金属および合金
    • 材料化学

    フィンガープリント

    「Combustion rate of coke in quasi-particle at iron ore sintering process」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

    引用スタイル