Common-Mode Voltage Investigation and Reduction of Split-Source Inverter

M. S. Hassan, Masahito Shoyama

研究成果: 著書/レポートタイプへの貢献会議での発言

抄録

Common mode voltage (CMV), produced by conventional high-frequency pulsewidth modulated (PWM) voltage source inverters (VSIs), is a major area of interest in applications such as transformerless Photovoltaic (PV) systems, electric motor drives, as well as grid-connected inverters. Since the VSI can only be utilized as a buck inverter, the AC output voltage should be boosted up using an extra boosting stage either in the DC side or in the AC side. So, to reduce the cost, complexity, size, and weight of the converter, the additional boosting stage must be eliminated by using single-stage DC-AC converters, which have the buck-boost feature in a single stage. This paper investigates the induced CMV issue due to a recent single-stage DC-AC inverter topology, split-source inverter (SSI), which has not been comprehensively examined. The CMV waveforms for both VSI and SSI have been analyzed and compared. Furthermore, the paper proposes a discontinuous PWM (DPWM) to alleviate the CMV effect. To check the validity of the proposed analysis, simulations were done using MATLAB/Simulink model. It was shown that a significant CMV reduction could be achieved using the proposed modulation technique.

元の言語英語
ホスト出版物のタイトル6th IEEE International Conference on Smart Grid, icSmartGrids 2018
出版者Institute of Electrical and Electronics Engineers Inc.
ページ118-122
ページ数5
ISBN(電子版)9781538684849
DOI
出版物ステータス出版済み - 2 4 2019
イベント6th IEEE International Conference on Smart Grid, icSmartGrids 2018 - Nagasaki, 日本
継続期間: 12 4 201812 6 2018

出版物シリーズ

名前6th IEEE International Conference on Smart Grid, icSmartGrids 2018

会議

会議6th IEEE International Conference on Smart Grid, icSmartGrids 2018
日本
Nagasaki
期間12/4/1812/6/18

Fingerprint

Electric potential
Electric motors
MATLAB
Topology
Modulation
Costs

All Science Journal Classification (ASJC) codes

  • Artificial Intelligence
  • Computer Networks and Communications
  • Energy Engineering and Power Technology
  • Safety, Risk, Reliability and Quality

これを引用

Hassan, M. S., & Shoyama, M. (2019). Common-Mode Voltage Investigation and Reduction of Split-Source Inverter. : 6th IEEE International Conference on Smart Grid, icSmartGrids 2018 (pp. 118-122). [8634437] (6th IEEE International Conference on Smart Grid, icSmartGrids 2018). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ISGWCP.2018.8634437

Common-Mode Voltage Investigation and Reduction of Split-Source Inverter. / Hassan, M. S.; Shoyama, Masahito.

6th IEEE International Conference on Smart Grid, icSmartGrids 2018. Institute of Electrical and Electronics Engineers Inc., 2019. p. 118-122 8634437 (6th IEEE International Conference on Smart Grid, icSmartGrids 2018).

研究成果: 著書/レポートタイプへの貢献会議での発言

Hassan, MS & Shoyama, M 2019, Common-Mode Voltage Investigation and Reduction of Split-Source Inverter. : 6th IEEE International Conference on Smart Grid, icSmartGrids 2018., 8634437, 6th IEEE International Conference on Smart Grid, icSmartGrids 2018, Institute of Electrical and Electronics Engineers Inc., pp. 118-122, 6th IEEE International Conference on Smart Grid, icSmartGrids 2018, Nagasaki, 日本, 12/4/18. https://doi.org/10.1109/ISGWCP.2018.8634437
Hassan MS, Shoyama M. Common-Mode Voltage Investigation and Reduction of Split-Source Inverter. : 6th IEEE International Conference on Smart Grid, icSmartGrids 2018. Institute of Electrical and Electronics Engineers Inc. 2019. p. 118-122. 8634437. (6th IEEE International Conference on Smart Grid, icSmartGrids 2018). https://doi.org/10.1109/ISGWCP.2018.8634437
Hassan, M. S. ; Shoyama, Masahito. / Common-Mode Voltage Investigation and Reduction of Split-Source Inverter. 6th IEEE International Conference on Smart Grid, icSmartGrids 2018. Institute of Electrical and Electronics Engineers Inc., 2019. pp. 118-122 (6th IEEE International Conference on Smart Grid, icSmartGrids 2018).
@inproceedings{1c346fb3415c4447beb7ae6d43f65e7e,
title = "Common-Mode Voltage Investigation and Reduction of Split-Source Inverter",
abstract = "Common mode voltage (CMV), produced by conventional high-frequency pulsewidth modulated (PWM) voltage source inverters (VSIs), is a major area of interest in applications such as transformerless Photovoltaic (PV) systems, electric motor drives, as well as grid-connected inverters. Since the VSI can only be utilized as a buck inverter, the AC output voltage should be boosted up using an extra boosting stage either in the DC side or in the AC side. So, to reduce the cost, complexity, size, and weight of the converter, the additional boosting stage must be eliminated by using single-stage DC-AC converters, which have the buck-boost feature in a single stage. This paper investigates the induced CMV issue due to a recent single-stage DC-AC inverter topology, split-source inverter (SSI), which has not been comprehensively examined. The CMV waveforms for both VSI and SSI have been analyzed and compared. Furthermore, the paper proposes a discontinuous PWM (DPWM) to alleviate the CMV effect. To check the validity of the proposed analysis, simulations were done using MATLAB/Simulink model. It was shown that a significant CMV reduction could be achieved using the proposed modulation technique.",
author = "Hassan, {M. S.} and Masahito Shoyama",
year = "2019",
month = "2",
day = "4",
doi = "10.1109/ISGWCP.2018.8634437",
language = "English",
series = "6th IEEE International Conference on Smart Grid, icSmartGrids 2018",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
pages = "118--122",
booktitle = "6th IEEE International Conference on Smart Grid, icSmartGrids 2018",
address = "United States",

}

TY - GEN

T1 - Common-Mode Voltage Investigation and Reduction of Split-Source Inverter

AU - Hassan, M. S.

AU - Shoyama, Masahito

PY - 2019/2/4

Y1 - 2019/2/4

N2 - Common mode voltage (CMV), produced by conventional high-frequency pulsewidth modulated (PWM) voltage source inverters (VSIs), is a major area of interest in applications such as transformerless Photovoltaic (PV) systems, electric motor drives, as well as grid-connected inverters. Since the VSI can only be utilized as a buck inverter, the AC output voltage should be boosted up using an extra boosting stage either in the DC side or in the AC side. So, to reduce the cost, complexity, size, and weight of the converter, the additional boosting stage must be eliminated by using single-stage DC-AC converters, which have the buck-boost feature in a single stage. This paper investigates the induced CMV issue due to a recent single-stage DC-AC inverter topology, split-source inverter (SSI), which has not been comprehensively examined. The CMV waveforms for both VSI and SSI have been analyzed and compared. Furthermore, the paper proposes a discontinuous PWM (DPWM) to alleviate the CMV effect. To check the validity of the proposed analysis, simulations were done using MATLAB/Simulink model. It was shown that a significant CMV reduction could be achieved using the proposed modulation technique.

AB - Common mode voltage (CMV), produced by conventional high-frequency pulsewidth modulated (PWM) voltage source inverters (VSIs), is a major area of interest in applications such as transformerless Photovoltaic (PV) systems, electric motor drives, as well as grid-connected inverters. Since the VSI can only be utilized as a buck inverter, the AC output voltage should be boosted up using an extra boosting stage either in the DC side or in the AC side. So, to reduce the cost, complexity, size, and weight of the converter, the additional boosting stage must be eliminated by using single-stage DC-AC converters, which have the buck-boost feature in a single stage. This paper investigates the induced CMV issue due to a recent single-stage DC-AC inverter topology, split-source inverter (SSI), which has not been comprehensively examined. The CMV waveforms for both VSI and SSI have been analyzed and compared. Furthermore, the paper proposes a discontinuous PWM (DPWM) to alleviate the CMV effect. To check the validity of the proposed analysis, simulations were done using MATLAB/Simulink model. It was shown that a significant CMV reduction could be achieved using the proposed modulation technique.

UR - http://www.scopus.com/inward/record.url?scp=85062820349&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85062820349&partnerID=8YFLogxK

U2 - 10.1109/ISGWCP.2018.8634437

DO - 10.1109/ISGWCP.2018.8634437

M3 - Conference contribution

T3 - 6th IEEE International Conference on Smart Grid, icSmartGrids 2018

SP - 118

EP - 122

BT - 6th IEEE International Conference on Smart Grid, icSmartGrids 2018

PB - Institute of Electrical and Electronics Engineers Inc.

ER -